Samsung SDE5003, SDE-500X, SDE-5003, SDE-400X Setting the Monitor, Setting Display position

Page 64

main menu

Monitor

You can configure information to be displayed.

Setting the Monitor

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Monitor>, and press [ENTER] button.
2.	Select <Monitor>.
3.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.

If selected <Continuous>, it displays the channel until you press [ALARM] button to release it.

•Display : Displays only checked items on the monitor screen.

Monitor
Monitor	Spot Out	Mode
 Event Display	OFF
 Display	Date	Time	CH Name	Icon
 Multi CH SEQ Time	5sec
 Video Output	VGA
Display Position Setup
	OK	Cancel

•Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of the Live screen.

•Video Out: You can set the video output mode.

-Auto : The default is set to Composite. (In VGA mode, the “SAMSUNG” logo will be displayed)

If a VGA source is connected, the source from the VGA will be displayed as main. (In Composite mode, the spot screen will be displayed)

The monitor distributor is not supported.

To switch to VGA mode, turn off the DVR set and connect the VGA jack. (The VGA monitor will turn on)

-VGA : The main video mode will switch to VGA after the DVR set reboots; the composite source will be displayed on the spot screen.

-Composite : The main video mode will switch to Composite after the DVR set reboots.

(SDE-4003/5003 : In VGA mode, the “SAMSUNG” logo will be displayed.)

4.When the monitor setup is done, press <OK>.

Setting Display position

Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data.

1.In the <Device> window, press the up/down ( ) button to move to <Monitor> and press the [ENTER] button.

2.Select the <Monitor> item.

3.Select <Display Position Setup> in the bottom.

You will move to the <Display Position Setup> window.

4.Use the four direction buttons or the number buttons on the front panel or the remote control to adjust the data position.

2012-01-01 01:10:25
Display Position Setup
	30
30	30
	30
OK	Cancel

64_ main menu

Image 64

Contents Channel Channel DVR SDE-400x/SDE-500xChannel Channel DVR Important Safety Instructions  OverviewOverview Battery Operating TemperatureBefore Start System ShutdownContents Connecting Web Viewer Mac Using Live Viewer MacUsing Live Viewer Windows 120 SEC Backup ViewerFeatures Standards ApprovalsPackage Contents SDE-4001P Package Camera Cable 4EA Quick Start GuideCamera Power Cable 1EA SDE-4003N PackageSDE-4004N Package Mouse 1EA Camera Cable 4EA Quick Start Guide 1EASDE-4005N Package SDE-5001N Package Camera Cable 8EA Quick Start Guide 1EA SDE-5002P/AJ Model doesn’t include Warranty Card SDE-5002N PackageSDE-5003N Package Part Names and Functions Front Mode / Next AlarmREC MenuPart Names and Functions Rear Power CameraVGA USBRemote Control  Console is designed for the service repair purpose onlyUsing the numeric buttons Changing the Remote Control IDChannel Press each button between 1 to 9 CHInstallation Checking the Installation Environment Connecting with Other DeviceConnecting the VIDEO, Audio and Monitor 10 11 8 13 14 15Connecting the USB Connecting the Camera SED-1001R, SEB-1005R, SEB-1007R Connecting with Other Device IR LEDConnecting the Camera SEB-1020R RJ-45 Cable Length 18.3m, 60ftCVBS+ Cvbs GND NameConnecting with DVR Installing the cameraSEB-1005R SEB-1007R Camera Bracket Specification Camera BracketAdjusting the Camera Bracket Installing the camera SED-1001R Precautions before installationMount the main unit onto the bracket Adjusting the monitoring direction for the cameraPanning Tilting Connecting the Alarm INPUT/OUTPUT Connecting the NetworkConnecting to network through Ethernet 10/100BaseT Connecting the alarm Input signalConnecting to Network through Adsl Connecting to the Network using the routerWith Press the Power button again to restart Getting StartedStarting the system Shutting Down the SystemLogin Remote control or the front panel of the DVR whenLocking All Buttons Control or the front panelLive Screen Configuration Icons on the Live ScreenAlarm OUT Error InformationLive Screen Menu Split Mode Menu Single Mode Menu Single mode menu is available only in Single ModeMenu Description Full Screen Zoom Enlarges the selected image. SDE-400X do not support the 16-split screen mode Date/Time/Language Time. Screen ModeAlarm Freeze View the Launcher MenuLive Mode Switching the screen modeSwitching the split mode Auto SequenceManual Switching If pressing the right button in 4-split modeChannel Setting Switching to Single ModeSelecting a Spot Out mode Spot OUTZoom Multichannel Live MenuAudio ON/OFF Audio On/Off in Single modeFreeze Event Monitoring System Setup Setting the Date/Time/LanguageDate/Time/Language  Main MenuDST Set up Daylight Saving Time with its period to make When the Date/Time/Language setup is done, press OKDate Sets the date that will appear on the screen You can select the date formatUsing the Calendar Setting HolidayMain Setting the Administrator Using Virtual KeyboardYou can set and change Administrator’s ID and password Permission ManagementSetting the Group To set the group authorityTo change the user password LoginTo restrict the user permissions UserWhen the user setup is done, press OK Setting the UserAdd User When the permission setup is done, press OK Setting PermissionsUse the virtual keyboard to enter the user ID System Management Checking the System InformationUpdating the Software System Management BroadcastS/W Upgrade Center for assistanceLog Information SettingsSystem Log Backup Log Backup LogEvent Log Select Event Log Use direction buttonsSetting the Device Setting the CameraCamera Press Enter buttonTo set the privacy region When the camera setup is done, press OKPrivacy Region Storage Device Confirming DevicesYou can check information on storage devices Select DeviceFormatting You can format a storage deviceSelect Format FormattedHDD Alarm Remote DevicesSetting Display position Setting the MonitorMonitor Setting the Spot Out Setting the Screen ModeSetting the Recording Recording ScheduleRecord Recording ScheduleEvent Record Duration Recording Color TagsREC Quality & Resolution Setting Standard Recording PropertiesSetting Event Recording Properties When the Event recording setup is done, press OKRecord Option Record OptionAuto Delete Setting the Event Sensor DetectionWindow of motion detection area setup appears Motion DetectionMotion Detection Sensor DetectionSetting the Motion Detection Area Video Loss DetectionAlarm Schedule Alarm ScheduleApply to All Alarm Backup Setting the BackupYou can backup the desired data to a connected device BackupNetwork Configuration Connection ModeSetting the Connection You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolProtocol Network Overview NotificationDVR 1st Set Port Forwarding Setting 2nd Set Port Forwarding SettingConnecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port Range Case of Port Forwarding SettingNetwork Main menu When the Ddns setup is done, press OK DdnsIPOLiS Ddns Setting Ddns SettingAfter log in, register your set with your information Live Transfer Live TransferMailing Service Smtp SettingEvent Setting Group SettingButton to move to Mailing Service and press Event Interval Set the event intervalWhen the recipient setting is done, press OK Recipient SettingGroupAdd recipient Time Search Search Search & Play Event Search Zoom In The map enlarges in detailHours  Double-click a desired time to zoom it in/out You can search for events by the channel and play themBackup Search Refer to Type in Backup Setting the Backup.Motion Search PlayPlayback Backup RangePlay Using the Playback Button What is Web Viewer? Product FeaturesIntroducing WEB Viewer System RequirementsSafari on MAC Connecting WEB Viewer MAC WEB Viewer Using Live Viewer MAC Connecting WEB Viewer Windows Using Live Viewer Windows Single Mode Quad Mode Nine Mode Sixteen Mode Single ModeOSD Information Display Split-ScreenChanging The Live Screen Mode Setting the display of the OSD time informationConnected DVR CH5 to CH8 Saving The Live Screen On The PCCapture Saves the current screen into a BMP or Jpeg file Changing The Live Screen Channel Using Search Viewer You can change the split mode by clicking each number icon Number of simultaneous connection is limited toSaving The Live Screen On The PC Check duplicates Searching The Recorded Video In The CalendarSearching The Recorded Video In The Timeline Viewer Setup SystemControlling Playback Date/Time/LanguageHoliday Permission ManagementSystem Management Device CameraStorage Device Remote DeviceMonitor For more information, refer to Setting the Recording. RecordRecording Schedule Event Record DurationREC Quality & Resolution You can set the Disk End ModeEvent Record OptionAlarm Schedule You can set the alarm output time if a video loss occursMotion Detection Video Loss DetectionNetwork For more information, refer to Network Configuration.Connection Live Transfer Mailing ServiceSmtp About What is Mobile Viewer? Using a SmartphoneKey Features Mobile ViewerSEC Backup Viewer Recommended System Requirements Backup Viewer Stop playing temporarily Product Specification Camera SED-1001R / SED-1005 / SED-1007RUTP  Appendix0C ~ +40C +32F ~ +104F / 20% ~ 85% RH Humidity Mechanical EnvironmentalW102 X H71.7 mm SEB-1020R Product Specification SDE-4001/4004/4005Ntsc 1TB Sata HDD PAL 500GB Sata HDDHdmi PTZ  AppendixPower consumption Details SDE-4001 SDE-4004 SDE-4005 General ElectricalW350 X H44 X D300mm 13.98 X 1.73 X 11.81 inch Mechanical Box Size OuterSDE-5001/5002 Details SDE-5001 SDE-5002 Video Inputs120fps Stream 264CIF Network Monitoring1TB Sata HDD Details SDE-5001 SDE-5002 Internal HDDBudvr Player, SECInclude Player Details SDE-5001 SDE-5002 General Electrical 8Kg Gross weight 12.8Kg Box Size OuterW350 X H44 X D300 mm 13.98 X 1.73 X 11.81 inch SDE-4003/5003 RTP, RTSP, HTTP, CGI USB 2.0, 2 ports Front Sata General ElectricalDC12V Adaptor,4A,100~250VAC, 50~60Hz, 48watt W360 X H44 X D160 mm 14.17 X 1.73 X 6.30 inchesCategory Details Factory Default Default SettingManagement Duration Smtp Troubleshooting By the service personnel Quick start guide backup, searchInternet using the router section in this manual Playback Icon on the launcher to switch to Live mode4CIF2CIFCIF GNU General Public License Open Source License Report on the ProductPreamble How to Apply These Terms to Your New Programs No WarrantyEND of Terms and Conditions Terms and Conditions Conveying Verbatim CopiesConveying Modified Source Versions Acceptance Not Required for Having Copies GNU Lesser General Public License Limitation of LiabilityPage OpenSSL License How to Apply These Terms to Your New LibrariesOriginal SSLeay License Page Correct disposal of batteries in this product Page Sales Network

Related manuals

Manual 2 pages 50.93 Kb