3HDD Addtion
You can install one additional hard disk drive inside the product (Max. 2 HDDs). However, there are lots of factors inside that may cause electrical shock, physical damage or malfunction. So please follow the instructions below to mount the HDD as the product couldn’ t recognize the additionally installed HDD or may not work properly due to incorrect installation or connec- tion.
[Installation Instructions]
•Make sure that any cable should NOT be stuck between components inside and do NOT use an uninsulated cable of which coating is stripped off (Otherwise, it can cause fire or malfunction).
•Any sharp edges inside the product can cause a physical damage during the installation.
•Keep the screws or components removed for HDD addition in a place where you can easily locate them when necessary. Uninstalled screws or components can cause malfunction or inoperability.
[To install an additional HDD]
1. Loosen the screws, two on each side (left/right) and three on the rear, to remove the cover.
2.Remove the cover.
(Push the cover back before lifting up on the rear side)
3.There is a bracket