3Key Functions
1. CHANNEL KEY & MODE KEY
●Use the CHANNEL Key when you want to view the channel in full screen.
●Press the desired channel key to view the channel in full screen.
●Audio of the channel is also selected. The S mark appears next to the title of the selected channel, and the audio of the channel is off.
●Audio recording is available for the one selected channel.
●Press the MODE Key to view the 1CH MODE and the QUAD MODE in turn as shown in the picture.
2. PIP KEY
●Use the PIP Key to view the main and the sub screen at the same time.
●You can view the two channels when pressing the PIP button in the 1CH mode.
●Press the ENTER Key in PIP mode to switch the main and sub screen.
●Press the PIP Key again to exit the PIP state and enable the Single screen mode.
●Press the FREEZE Key to freeze the main screen only. On the top right of the screen, ‘’(FREEZE MARK) appears.
●Clear the Freeze before operating another key.
●Press the Sequence Key in the PIP mode PIP to automatically sequence to the sub screen. (Auto sequence is cleared when pressing the Sequence Key again.)
☛Sequence in the PIP MAIN CHANNEL 1 screen SUB2 ➝ SUB3 ➝ SUB4 ➝ SUB2