Recording, Playback | Samsung NETWORK DIGITAL VIDEO RECORDER

CHAPTER 4 OPERATION PROCEDURES

1Getting Started with your machine

Please assure the following instructions before you switch on the machine:

1.1Voltage check: Before power cable is connected, please check the voltage of this appliance against the supply.

Input voltage range 90~260V, frequency range 57-63Hz.

CAUTION - Damage would be caused if incorrect power voltage applied.

1.2Hard Disk connection: Make sure the 40-Pin Hard Disk Data cable and the 4-Pin power connectors are properly connected.

2Recording

Press the REC key to enter the Recording Mode. And press the STOP key to stop recording.

z“REC[M]” or “REC[Q]” sign will be indicated in top left corner on the screen, It mean you select MUX or QUAD recording.

z“15P” sign will be indicated in top right corner on the screen, It mean the recording speed you selected. 15P means 15 fields per second.

z“O” sign will be indicated in center corner on the screen, It mean the marked channel be recorded.

For more information on Setting up Recording Mode, refer to Chapter 3 Record Setup

In Recording Mode, if there is a power failure or power lost for any reasons that cause a shut down of this machine, it will be back to the Recording Mode automatically when power restored.

3Playback

Press the ►PLAY button to into time search.

The following message will be displayed on the screen (The list of MASTER HARD DRIVE means the time it start and end be recorded at this HDD).

TIME SEARCH

>MASTER HARD DRIVE 2004/JUN/30 10:12:03

START TIME：2004/JUN/30 08:16:55

END TIME：2004/JUL/09 12:09:09

Use the ◄ or ► button to select items.

Press the ▲ or ▼ button to decrease / increase the number.

Press MENU to escape to exit the set up mode.

Press ►PLAY button to play video forward.

z“PLAY” sign will be indicated in top left corner on the screen.

z“MUX or QUAD” sign will be indicated in top right corner on the screen, It mean the recording mode you selected.


Press	Rew Search	button to play video reverse at 6 times speed fast rewind mode.
Press
	F.Fwd Search		button to play video forward at high speed. Press the button again the

speed will be change circulative from ×2, ×4, to the highest ×6.