Samsung NETWORK DIGITAL VIDEO RECORDER user manual Chapter Introduction

Page 6

CHAPTER 1

INTRODUCTION

This product is 4 cameras input appliance with multiple function which will bring you following features:

zDevice can be performed as VHS system with live display, play back and video recording

zDevice operates in hardware base with no OS (operating system) necessary for more reliability and stability

zDigitize data storage with M-JPEG compression technology will give you organized video data management without using mess huge traditional video tape

zSupport various type of camera with real, live mode display

zMulti-speed recording selection on normal recording mode or alarm recording mode, the highest speed of recording is 30/25 (NTSC/PAL) fields on both mode

zContrast, hue and brightness are adjustable for each camera individually

zSupport up to 2 hard disks (HDD) from 40GB to 250GB compatible

zWhen external alarm is triggered , correspond cameras number will show up on the monitor with texts

zSelectable recording qualities (best/high/medium/low)

zRecording can operate manually or gets activated automatically when alarm is triggered

zMotion detection function available, user can easily adjust sensitive of motion detection

zPlayback record can be searched by time or by event list

zPlay back mode could not be easier then ever for you to review the video that gets recorded on reverse (x6) and fast forwarding (×2, ×4, ×6)

zPlay back mode with pause (field by field) for forward

zEasy operation, setting can be easily modified OSD (on screen display) menu

zDevice will overwrites data and notice operator on monitor when the HDD is going full

zHDD capacity status can be display on the screen for better storage management

zSystem will restore the previous setting and continue camera activity after restart

zKey lock function available to secure your DVR from button pressing accidentally

zProvide 2 Monitor output

zOptional network function

zSupport compact flash (CF) card for random backup and VCR for fully backup

zAlarm notification could be sent via email when motion or external alarms are triggered.

1

Image 6
Contents Channels Network Digital Video Recorder FCC Compliance Explanation of Graphical Symbols WaringsTable of Contents Setup Menu List : : : : : :Chapter Introduction Front Panel Layout Overview ChapterPart Buttons Function ListCopy Power / Power SWPlay Menu HDD FrameSetup Procedures Record Mode MUXMUX/QUAD Record Setup Record Mode MUX Normal Record FPSAlarm Record FPS Camera Record ONON/OFFPress UP,DOWN to Select Press Enter to SET, Menu to Exit Motion Event Migration OFFSchedule Record O O O O O O O O O O O O O O O O O O O O O O Event ListPassword Correct Hard Disk Formatted HDD Management Overwrite Mode HDD Full WarningOverwrite Mode YES no Password IncorrectHDD N/A is with no HDD Recording Chapter Operation ProceduresGetting Started with your machine PlaybackRecord Segment PRESSUP,DOWN,ENTER to SET Pressplay to PLAY,MENU to ExitBackup Alarm control External alarm connectorNetwork SpcificationsChapter Recording Time Length Chapter Hard Drive Installation Procedures