Features & Operation
reprogram the receivers to work with the ID codes of their original remote controls.
Using multiple Tote-Remotes to control one computer
Since a receiver can only operate on one ID code at a time, all the remote controls would have to be set to the same ID code in order to control one receiver. Although you can randomly reset your Tote- Remote’s ID code (see “Reset ID Code” instructions under “ADVANCED BUTTON FUNCTIONS” section above), there is no way to set the ID code of a Tote-Remote to a specific ID code. Therefore, the only way you could use two (or more) remote controls with one receiver is if by unlikely chance you bought two remote controls that were set in the factory to the same ID code or if by chance you were able to randomly reset one remote control on one remote control to the same ID code as another remote control. Since there are many different ID codes, the chances of being able to randomly reset one remote control’s ID code to match the ID code of another remote control are very slim.
Tote-Remote User’s Manual, Page 14