
Thank you for purchasing this RCA universal remote control. This product is designed to operate a wide variety of video and audio components. Please retain this guide for future reference.
Table of Contents
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Key Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This universal remote control is already programmed for most RCA, GE, and PROSCAN branded TVs, VCRs, DBS systems (manufactured before 2003), and DVD players.
Note: For users of RCA and PROSCAN DBS products: Older DBS models require
that the INFO or MENU key on this remote be used to make program selections. Use the OK key for making program selections on newer RCA and PROSCAN DBS models. If your satellite receiver was purchased after 2003, programming the remote is required.
Battery Installation
Your universal remote requires 2 new AA alkaline batteries (sold separately).
To install the batteries:
1.On the back of the remote, push down on the cover and slide it off.
2.Insert the batteries, matching the batteries to the (+) and
3.Slide the battery cover back into place.
Note: Reprogramming may be required after batteries are replaced.
3