Follow the steps below to set up your remote using the Code Search method. If you complete these steps and your device does not respond, follow the Code List method for your device.
Programming | a Device using |
|
| ||||
CODE SEARCH |
|
|
|
| |||
1. | Manually | turn | on your | device |
| I | |
| (TV, VCR, Cable Box). |
| PRESS | + | |||
| Press and hc&l |
|
| ||||
2. | CODE | SEARCH. | CODE | ||||
| |||||||
& HOLD SEARCH | |||||||
|
|
|
|
|
| 0 | |
|
|
|
|
|
| 0 | |
3.Press and release the device button you want to set up (TV, VCR, or CABLE). If you are using AUX for a device, press and release AUX, then the device button for the type of device to be programmed (TV,
VCR, or CABLE). The selected device button will flash once.
AuxCABLEVCR TV
0000
| 4 |
| q |
4. Release CODE SEARCH. | RELEASE CODE |
| SEARCH |
| 0 |
| 0 |
5.Press OFF/ON repeatedly until the device turns off (Important: you may have to press up to 100 times at a rate of once per second).
6.Once the device turns off. press and release ENTER:
7.With the device on, press another button, for example CHANNEL UP.
If the device responds, no further programming is required. If the device does not respond, repeat steps
OFF/ON
CHAN
11