Place batteries in the remote


Setting	Up Your Universal		Remote	.2
Button	Description			.3
Programming Using Code			Lists	4
TV
VCR	.............................................................................			6
Cable		Box		8	;
AUX				10
Code Lists				.5
TV
VCR				.7
Cable		Box		.9
TV/VCR		Combinations		.9
Set-Up Using Code Search				.11
Operating		a		.12
TV
Cable		Box		.12
VCR				.13
Custom	TV Feature			.14
Special	Operations			.15
Warranty		.......................................................	Inside	Card
Consumer		Helpline	Inside	Card

1.Remove the battery compartment cover.

2.Place four AAA batteries as shown, matching the + and - end of each battery as indicated in the battery compartment.

3.Replace the cover.

If batteries are removed from the remote, it will require reprogramming.

Determine. if your remote needs programmmg

(SomeRCA,GEand ProScandevicesmay already be

prP-programmed) .

1.Press the button of the device you want to control (for example TV).

2.If the device turns on, press another button to confirm (for example

CHANNEL UP).

3.If the device you selected (TV) responds, you will not need to pro- gram the remote. If the device you selected (TV) does not respond, you will need to program the remote.

4.Repeat steps l-3 for other devices.

AUXCANE“CR TV

0000

CHAN

TV/VCR