Button Description For Video Operation

Button Description For Video Operation

INDICATOR LIGHT

The Indicator Light flashes to show that the remote is working.

ON•OFF

The ON•OFF button operates the same as your original remote Note: Some RCA, GE and ProScan models require you to press the device button to turn the device on and the ON•OFF button to turn the device off.

TV, VCR, DVD, DBS•SAT, AUDIO, CABLE

The TV, VCR, DVD, DBS•SAT, AUDIO, and CABLE buttons are used to select the device you want to control.

VOL & CH

The VOL (Volume) and CH (Channel) buttons increase or decrease the channel numbers or volume.

MUTE

Mutes volume on the TV.

GO BACK

The GO BACK button allows you to go to the previous channel you selected. Operates the same as Last Channel, Previous Channel, or Recall button on your original remote.

CODE SEARCH

Used to program the remote or to search through codes.

GUIDE

Brings up the on-screen TV program guide if your TV has that feature.

INFO

Shows the date and the time if your TV or VCR has that feature. Functions the same as a Display button.

NAVIGATION BUTTONS & SELECT

Used to move through on screen menuing and guides. With some DBS models the INFO button should be used to select the hig lighted item. Use the navigation buttons to move the highlighted choice up, down, left, or right.

MENU•PROG

Brings up the Main Menu. If you are already in the menu system, press SELECT to select a highlighted choice. Use the arrow buttons to move through the Menu Selections.

CLEAR

Removes the on screen display to return to normal viewing.

0-9

The number buttons operate the same as on your original remote, and are used for entering device codes.

ENTER

The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process.

TV•VCR

In VCR mode, the TV•VCR button operates the TV•VCR function of your VCR.

REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE These buttons operate the same as on your original VCR or DVD remote. You must press the REC button twice to begin recording.

PIP, SWAP, & INPUT

PIP (Picture-in-Picture) and SWAP operate your Television’s Picture in-Picture features. INPUT selects the video inputs of your TV if equipped with this feature.

SLEEP

The SLEEP button allows you to set a time for you to turn off your TV automatically.

Button Description For Audio Operation

AUDIO OPERATION (Rose Colored Graphics)

Press AUDIO button to enable the AUDIO mode

LEVEL+/LEVEL-

Sets the level of the speakers during test tone mode.

DSP ON•OFF

Enables the receiver’s Digital

Signal Processing mode.

DSP MODE

When the DSP mode is enabled, pressing this button allows the user to cycle through the various DSP modes.

CD, TAPE, TUNER, TV,

VIDEO 1, VIDEO 2

For new RCA brands, these buttons will turn the selected device on.

AM•FM

The AM•FM button allows you to select the AM•FM band on you audio receiver.

FUNCTION

Selects the different audio input devices. The number buttons also select the func- tion labeled below the but- tons when in AUDIO mode.

DELAY-, ON, DELAY+ Increases or decreases the delay between the surround and main speakers when the receiver is in the surround sound mode.

ON•OFF, SURR, MODE ON•OFF SURR toggles the surround modes on and off. SURR MODE cycles through the receiver’s various surround sound mode settings.

FRONT, CENTER, REAR,

TEST

Adjust the levels of the front, center, and rear speakers respectively used with Level + / Level - . The test tone must be enabled first by pressing the TEST button.

PRESET

Used to operate preset channels while in Audio Mode.