Programming For DVD
Most RCA, GE and ProScan DVD systems will not require programming. Check to see if your DVD System responds to the remote before you begin programming.
Programming For DBS System
Most RCA, GE and ProScan Satellite systems will not require programming. Check to see if your DBS Satellite System responds to the remote before you begin programming.
1.Manually turn on the DVD System.
Find the three digit code for your DVD System in the code list below.
2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
INDICATOR
LIGHT
CODE
SEARCH
1.Manually turn on DBS System.
Find the three digit code for your DBS System in the code list below.
2. Press and hold the CODE SEARCH | INDICATOR |
button until the INDICATOR LIGHT | LIGHT |
CODE | |
lights, then release the CODE | SEARCH |
| |
SEARCH button. |
|
3.Press and release the DVD button (The INDICATOR LIGHT will blink then remain lit).
4.Enter the code using the Number Buttons.
After your code is entered, the
INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at your DVD System and press the ON•OFFbutton. Your DVD System should turn off.
6.If the DVD System responds, no further programming is required.
Note: If your DVD does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 16.
DVD(BLINK)
(OFF)
ON
OFF
3. Press and release the DBS•SAT button |
(The INDICATOR LIGHT will blink then |
remain lit). |
4. Enter the code using the Number |
Buttons. |
After your code is entered, the |
INDICATOR LIGHT will turn off. If |
the code is not valid, the INDICATOR |
LIGHT will blink. Check the code list |
and repeat process. |
5. Aim the remote at your DBS System |
and press the ON•OFFbutton. Your |
DBS System should turn off. |
Note: If your DBS System does not respond, |
try all the codes for your brand. If the codes do |
not work, or your brand is not listed, try the |
Code Search method on page 16. |
6. With your DBS System on, press CH+ |
(CHANNEL UP). If the satellite system |
responds, no further programming is |
DBS¥SAT (BLINK)
(OFF)
ON
OFF
7. Enter your code here for easy reference. | DVD CODE |
DVD Codes
required. |
7. Enter your code here for easy reference. |
SATELLITE CODE |
Aiwa | 350 |
Hitachi | 351 |
JVC | 161, 352 |
Konka | 353, 354 |
Magnavox | 162, 356, 357 |
Mitsubishi | 163 |
Panasonic | 355 |
Philips | 162, 356, 357 |
Pioneer | 165 |
ProScan | 160 |
RCA | 160 |
Sanyo | 359 |
Sony | 166, 360, 361 |
Toshiba | 167, 362, 363 |
Zenith | 364 |
Satellite Codes |
|
|
Alphastar | 079 | |
Echostar (Dish System) | ..........089 | |
Echosphere (Dish Net) | ..........079 | |
GE | 071, 080, 081 | |
Hitachi SYS I | 084 | |
Hitachi SYS II | 083 | |
Hughes | 077, 090 | |
Magnavox | 085 | |
JVC | 082 | |
Panasonic | ................................075 |
Philips | 085 |
Primestar | 076 |
Proscan | 071, 080, 081 |
RCA | 071, 080, 081 |
Sony | 072 |
Toshiba | 073 |
Uniden | 086 |
9 | 10 |