Auto Page RS-610 manual Disabling the Remote Start System If installed

Page 7

F. SHUT-DOWN INPUT FOR REMOTE STARTER:

If any of the following conditions exist while the system is operating, the engine will not start or will shut down immediately:

1.The hood is opened.

2.The brake pedal is pressed.

3.Move the optional remote start enable toggle switch to OFF position. (If installed)

4.Engine is over-revved. {“Tachometer checking type” only}

5.The pre-programmed run time (5 /10 / 20 / 30 minutes) has elapsed.

6.Transmitter button is pressed.

7.The vehicle refused to start running after {3} unsuccessful attempts.

G. DISABLING THE REMOTE START SYSTEM: (If installed)

This feature allows your system’s remote start unit to be temporarily dis- abled to prevent the vehicle from being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote start, move the optional remote start enable toggle switch to the OFF position.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operations Manual Active Unlock Active LockParking Lights Chirp IndicatorValet Mode LED DisplayTrunk Release Panic Function if CAR Horn is InstalledDome Light Convenience Delay & Supervision Exit Valet ModeSaftey Start Operation To Remote Start the VehicleTo Turn OFF the Remote Start Enter Temporary Stop FeatureTimer Start Exit the timer startSHUT-DOWN Input for Remote Starter Disabling the Remote Start System If installedPage Continental U.S. Only Limited Lifetime Warranty ProvisionsModel Serial # Autopage Warranty Service CardTh Street Suite #101 Torrance, CA Tel 310 618-2002 or 800
Top Page Image Contents