Velodyne Acoustics SC-IW Install Drywall Above Filler Plate, Tape, Mud, Texture and Paint Wall

Step 11 - Install Drywall Above Filler Plate

After the filler plate is secured to the driver module, install a replacement piece of drywall above the filler plate in the opening. This drywall should be securely fastened to the studs using drywall screws.

Figure 34: Drywall Installation

Step 12 - Tape, Mud, Texture and Paint Wall

After the SC--IW is installed into the wall, the wall should be taped, textured, blended and then painted to match the existing wall. Note the grille can also be painted to match the de´cor.

Note: The paint cover should be remain on the driver until this step is complete.

.w w w . v e l o d y n e . c o m SC-IW Installation Manual

35