Manuals / Dell / Computer Equipment / Laptop

Dell 15 - 3549 owner manual Installing the Power Connector

Models: 15 - 3549

1 48

Download 48 pages 5.89 Kb

Page 33

Installing the Power Connector

b.Unroute the cable from the retention clips [2].

c.Lift the power connector from the computer [3].

Installing the Power Connector

1.Insert the power connector into its slot on the chassis and guide the cable into the retention tabs.

2.Connect the power connector cable to the system board.

3.Install:

a.palmrest assembly

b.keyboard

c.memory module

d.hard drive

e.WLAN card

f.access panel

g.optical disk-drive

h.battery

4.Follow the procedures in After Working Inside Your computer.

33

Image 33

Dell 15 - 3549 owner manual Installing the Power Connector

Contents

Regulatory Model P45F Regulatory Type P45F001 Dell Vostro 15 Owners ManualNotes, Cautions, and Warnings 2 Removing and Installing Components 1 Working on Your ComputerContents 4 Diagnostics 3 System Setup5 Specifications 6 Contacting DellWorking on Your Computer Connecting the Power AdapterFront and Back View System OverviewBefore Working Inside Your Computer Turning Off Your Computer Recommended ToolsAfter Working Inside Your Computer Removing the Battery Removing and Installing ComponentsInstalling the Optical Drive Installing the BatteryRemoving the Access Panel Removing the Optical DriveRemoving the Hard Drive Installing the Access PanelRemoving the Memory Module Installing the Hard DriveInstalling the Memory Module Installing the WLAN CardRemoving the WLAN Card Removing the Keyboard Installing the Keyboard 2. Remove the Battery 3. Remove the access panel Removing the Palmrest Assembly4. Once done the folds should look as shown below 4. Remove the keyboard6. Perform the following steps as shown in the illustration b. Lift the touchpad and power cables from locking tabc. Remove the screws from inside the keyboard cavity 7. Perform the following steps as shown in the illustrationRemoving the Battery Connector Installing the Palmrest AssemblyRemoving the Coin-Cell Battery Installing the Battery ConnectorRemoving the Optical Drive Connector Installing the Coin-cell battery1. Insert the coin-cell battery and press to lock 2. Install 2. RemoveRemoving the Input/Output I/0 Board Installing the Optical Drive Connector2. Connect the I/O board cable to the system board 3. Install Installing the Input/Output I/O Board4. Lift the I/O board from the computer 1. Insert the I/O board into the chassisRemoving the Speakers Removing the System Board Installing the SpeakersInstalling the System Board Removing the Display Assembly Page Installing the Display Assembly Removing the Camera Removing the Heatsink Installing the CameraRemoving the Power Connector Installing the Heatsink AssemblyInstalling the Power Connector System Setup Boot SequenceNavigation Keys System Setup Options Table 1. Navigation KeysTable 2. Main Options Table 3. Advanced Options Default Enabled Enable or disable thepower supply to the on Enable or disable theThis field displays if an HDD password is set for this Table 5. Boot OptionsTable 4. Security Options Updating the BIOS System and Setup PasswordPassword Type Deleting or Changing an Existing System and/or Setup Password Assigning a System Password and Setup PasswordEnhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsDevice Status Lights Power Status LightsSpecifications SpecificationsTable 9. Audio Table 13. Ports and ConnectorsTable 10. Video Table 11. CameraTable 14. Display Table 15. KeyboardTable 16. Touchpad Table 17. Battery Table 18. AC AdapterTable 19. Physical Table 20. Environmental Contacting Dell Contacting Dell