RCU900_IB_revC.qxp 12/3/02 9:45 Page 21
4.If keypress beep is enabled, you will hear a series of beeps as the Macro executes. The number of beeps will correspond to the number of Learned commands within the Macro.
Delete a Smart Macro
To delete a previously programmed Smart Macro, follow these steps:
1.Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately
2.Release the SETUP key.
3.Press and hold the LCD MACRO key until Macro Setup Screen 7 is shown. The LED indicator light blinks once to indicate acceptance of the keypress. Release the LCD MACRO key. Only the programmed Macro key numbers will be shown.
4.Press and release the digit key for the Macro you wish to delete. The LED indicator light blinks once to indicate acceptance of the keypress.
5.The Macro deletion is complete and the Main Setup Screen will be shown.
6.Press LCD CLEAR on the Main Setup Screen to exit Setup Mode.
7.If you are in the process of deleting a Smart Macro and you decide not to delete it, you can abort the deletion process by pressing the LCD CLEAR key.
Sleep Timer
Love to go to sleep with the TV on in the background? With the RCU900, you can program your TV to turn off after a period of time (from one to 99 minutes). The LCD SLEEP key is used to set the Sleep Timer and is only available in the main TV Mode. The SLEEP key is not displayed for any mode other than TV. The TV Off command is sent at the end of the time period to turn the TV off. You can set the Sleep Timer in two ways.
Method 1 (From Normal Operation)
To set your Sleep Timer from normal operation, follow these steps:
1.Press the TV device key on the rubber keypad.
2.Press the LCD SCREEN key to switch to the second TV screen on the touchscreen, which shows the LCD SLEEP key.
3.Press and hold the LCD SLEEP key in TV Screen 2 until the LED indicator light remains on and the touchscreen shows the Sleep Setup Screen. This process takes approximately
21