RCU900_IB_revC.qxp 12/3/02 9:45 Page 26
Glossary of Terms
AUDIO FEATURES (ACTIVE LCD KEYS IN AUDIO DEVICE MODE)
AM.FM
The AM.FM allows you to select the AM or FM band on your audio system.
CD, TAPE, TUNER, TV, VIDEO1 & VIDEO2
Use the CD, TAPE, TUNER, TV, VIDEO1 & VIDEO2 keys to select
the device you want to control.
CENTER, FRONT, REAR & OPTION
You can adjust the levels of the center, front and rear speakers by using the LEVEL▲/LEVEL▼ keys. For RCA audio receivers, the OPTION key is used to command your audio receiver to generate a test tone in order to make speaker balance adjustments to maximize your audio system performance.
DSP
When the Digital Signal Processing (DSP) Mode is enabled, pressing this key allows you to cycle through the various DSP Modes.
LEVEL▲ & LEVEL▼
The LEVEL keys are used to make adjustments on delay time, center speaker output level, rear speaker output level or front speaker output level.
PROG
The PROGRAM key allows you to program your audio preset channels.
DEVICE KEYS
The device keys on the rubber keypad change the device currently being controlled by the remote (e.g., TV, VCR, SAT/CBL, DVD, AUDIO, CD, AUX 1, AUX 2).
ENTER
The LCD ENTER key is used to complete channel selections for some brands of TVs. It is also used to complete the highlighted sections in the Main Menu.
GUIDE
If your device is equipped with this feature, the LCD GUIDE key brings up the
INPUT
The LCD INPUT key selects the video inputs of your device, if the device is equipped with this feature.
LCD
The Liquid Crystal Display (LCD) acts as a “virtual keypad” on the remote. The touchscreen is normally blank when not in use. Pressing any of the LCD keys or the SETUP key, a device key, or the LIGHT key on the rubber keypad turns the touchscreen on. The remaining rubber keys do not activate the touchscreen.
LEARN
The Learn feature is used to supplement the
26