RCA RCU410MSL manual Learning Function, Clearing a Learned Button

RCU410MSL_IB 10/4/01 1:57 PM Page 12

Learning Function

The learning feature is used as a supplement to the standard preprogrammed library. The standard code library provides most of the functions needed, but you can add a small number of additional functions of your choice.

Clearing A Learned Button

To clear a learned button sequence, use the procedure below.

NOTE: .• No functions may be stored under the LEARN, SLEEP, CODE SEARCH or any of the device button

NOTE: • No functions may be stored under the LEARN, SLEEP, CODE SEARCH, MENU or any of the device button.

1. Place the RCA remote control										6
		2 INCHES					TV	CHAN	3	1
									PREV
										5
									CH MUTE	2
unit and the Original remote								VCR		OLV
							CODESEARCH
								CABLE
control unit so that they face						ON•OFF		OFF/ON
			SAT•AUX
			VCR
each other. They should not be			REVERSE	CODE	SEARCH
		RECORD
	VCR		STOP			ABLE TV
				FORW
	TV•		PLAY			C
any more than 2 inches apart.		CH	ENTER		ARD
		+	PA
			USE

1.Press and hold the CODE- SEARCH button until the

INDICATOR LIGHT lights, then release the CODE SEARCH button.

2. Press and release the desired Mode button (TV, VCR, CABLE, AUX, etc…).

CODE INDICATOR

SEARCH LIGHT

2.	Press and hold the CODE
	SEARCH button until the INDI-
	CATOR LIGHT lights, then release
	the CODE SEARCH button.
3.	Press and release the desired
	Mode button (TV, VCR, CABLE,
	SAT, etc…). The INDICATOR
	LIGHT will blink off once button
	press is accepted.
4.	Press and release the LEARN
	button.

CODE INDICATOR

SEARCH LIGHT

(BLINK)

The INDICATOR LIGHT will turn off once the button press is accepted.

3.Press and release the LEARN button twice. The INDICATOR LIGHT will turn off once the but- ton press is accepted.

4.Press and release the CODE SEARCH button and the remote will return to original operation mode. All learned command functions under the device are now cleared.

(BLINK)

CODE

SEARCH

5. Press and release the valid button

to be learned on the RCA remote

in which you will store a new

function. The L1, L2, L3, L4, or

other functions keys may be used

Clearing All Learned Buttons or Functions

This procedure will erase all learned functions in every device mode. This step is recommended when attempting any learning of a new function from a new remote.

in this programming mode.

6. Press and hold the button on

the original remote control until

INDICATOR LIGHT on the RCA

remote blinks once. Once the

INDICATOR LIGHT blinks you

may continue with the next

function.

If there is error in learning the new

function the INDICATOR LIGHT

will flash for 3 seconds but remain

in the learning mode. Return to step

5 if the INDICATOR LIGHT flashed.

NOTE: Hold the function key on your original remote for at least 3 seconds for the command to be successfully learned.

(BLINK)

1.Press and hold the CODE SEARCH button until the

INDICATOR LIGHT lights,

then release the CODE SEARCH button.

2.Press and release the LEARN button twice. The INDICATOR LIGHT will light off once the button press is accepted.

3.Press and release the CODE SEARCH button and the remote will return to original operation mode. All learned command entries are now cleared.

CODE INDICATOR

SEARCH LIGHT

CODE

SEARCH

7. Repeat steps 5 and 6 to store more functions.

CODE

SEARCH

8. Once the selected functions are stored press the CODE SEARCH button and the remote will return to original operation mode.

11 12