Adder Technology X2 manual Warranty

Products in the X2-Series range

The following related X2-Series items are also available:

•X2-Gold Extender (part code: X2-Gold)

This pair of modules allow you to extend not only keyboard, video and mouse signals up to 300 metres, but also similarly support microphone, stereo speaker and an RS232 serial channel.

•X2-Silver Extender (part code: X2-Silver)

As per the X2-Gold with the exception of the audio extension facility.

•X2 Extender (part code: X2)

As per the X2-Silver with the exception of the skew adjustment feature.

•Dual Video Transmitter (part code: XDVT)

Allows one system to be controlled from two locations or permits a second video channel to be sent to a remote location. Used in conjunction with two X2-Silver or X2 Remote modules.

•Rack mount chassis (part code: RMK-CHASSIS)

This 19” chassis allows multiple X2-Series modules to be neatly arranged within a standard cabinet. Securing plates and screws are supplied separately for each X2-Series module for use with the rack mount chassis.

•Power distribution module (part code: X-PDM4)

Provides power for up to four X2-Series modules to reduce mains power socket requirements.

•Rack mount securing plates

•for X2-Gold modules (part code: X-RMK-GOLD)

•for X2-Silver modules (part code: X-RMK-SILVER)

•for X2 modules (part code: X-RMK)

•single slot blanking plate (part code: X-RMK-BLANK)

•quad slot blanking plate (part code: X-RMK-BLANK4)

Safety information

•For use in dry, oil free indoor environments only.

•Do not use to link between buildings.

•Ensure that the twisted pair interconnect cable is installed in compliance with all applicable wiring regulations.

•Do not connect the CATx link interface (RJ45 style connector) to any other equipment, particularly network or telecommunications equipment.

•Warning – the power adapter contains live parts.

•No user serviceable parts are contained within the power adapter - do not dismantle.

•Plug the power adapter into a socket outlet close to the AdderLink unit that it is powering.

•Replace the power adapter with a manufacturer approved type only.

•Do not use the power adapter if the power adapter case becomes damaged, cracked or broken or if you suspect that it is not operating properly.

•If you use a power extension cord with the extenders, make sure the total ampere rating of the devices plugged into the extension cord do not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all the devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

•Do not attempt to service the X2 modules yourself.

•The X2 modules and power supplies can get warm in operation – do not situate them in an enclosed space without any ventilation.

•The X2 modules do not provide ground isolation and should not be used for any applications that require ground isolation or galvanic isolation.

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free of charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. Adder’s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product. If any difficulty is experienced in the installation or use of this product that you are unable to resolve, please contact your supplier.

        

23