AG Neovo FST Series Reliability Condition, Recommended Connector, Temperature Condition

FST Series Product Specifications

3. Reliability Condition

3-1. Temperature Condition

§Temperature Condition Test

Following test are performed in the condition with no dew condensation:

Cold Test:	Tested after leaving the parts in -30°C±3°C for 240 hours and in the room temperature
	for 2 hours.
Heat Test:	Tested after leaving the parts in 80°C±3°C for 240 hours and in the room temperature for
	2 hours.

Humidity Test: Tested after leaving the parts in the temperature 60°C±3°C, humidity 90 to 95% for 240

	hours and in the room temperature for 2 hours.
Cycle Test:	Tested after 5 cycles of leaving the parts in the temperature -30°C±3°C for 1 hour and in
	the room temperature for 0.5 hours, then leaving the parts in the temperature 70°C±3°C
	for 1 hour and in the room temperature for 0.5 hours.
Judgement:	Must satisfy the following:
	Activation Force:	Within ±50% of the specification.
	Linearity:	Must satisfy the specification.
	Terminal Resistance:	Must satisfy the specification.
	Insulation Resistance:	Must satisfy the specification.
	Appearance:	Must satisfy the specification.

4. Recommended Connector

4-1. Recommended Connector

Part No.	Manufacturer	Pitch	Remarks
RE-H052SD-1110	J.S.T. Mfg Co., Ltd	2.54mm	equivalent

7 Rev. 2.0 ©2005 - 2006 DMC Co., Ltd.