OPERATION - TV Tuner Control Functions
•Press and Hold: Start AUTO PROGRAM
While the OSD is displayed, press and hold the same key for at least 2 seconds, AUTO PROGRAM begins searching the selected band for receivable channels. The status of the search is shown in the OSD (see below). Once the AUTO PROGRAM starts, it cannot be stopped until the entire band is scanned.
AUTO PROGRAM SCANNING
TV LOCAL
SEARCH CH XX
7.PRESET Key
The PRESET key is able to assign any channel to any of the numeric keys 0 to 9. The TV and CABLE Bands can have up to 10 presets each. This memory is entirely separate from the AUTO PROGRAM memory. This key has two functions as follows.
•Press and release: Display PRESET CH list
Pressing and releasing the PRESET key [A] will list all the PRESETs and their assigned channels [B].
Pressing one of the numeric keys while the OSD is displayed, changes the channel to the one corresponding to the stored PRESET.
AB
C
This line is blinking.
CHANNEL PRESET
CABLE |
| |
0 : CH 07 | 5 : CH32 | |
1 : CH 13 | 6 | : CH35 |
2 : CH 24 | 7 | : CH41 |
3 : CH 29 | 8 | : |
4 : CH 31 | 9 | : |
CHANNEL PRESET
CABLE |
| |
0 : CH 07 | 5 : CH32 | |
1 : CH 13 | 6 | : CH35 |
2 : CH 24 | 7 | : CH41 |
3 : CH 29 | 8 | : |
4 : CH 31 | 9 | : |
•Press and Hold: Set PRESET CH
Regardless of whether the OSD is displayed or not, press and hold PRESET key for at least 2 seconds. The PRESET CH List is displayed and “CHANNEL PRESET” at the top of the screen blinks [C]. This indicates that the current channel can be assigned to one of the PRESETS.
Pressing one of the numeric keys assigns the current channel to that PRESET number.
After 8 seconds, the OSD display disappears.
12