Alpine TCS-V430A owner manual TV Power Key, Reset Switch, Power Indicator LED, Last Status Memory

OPERATION - TV Tuner Control Functions

10. TV POWER Key

Power ON/OFF control for TCS-V430A is as follows:

•POWER ON: Press TV POWER key when there is no video signal from any external input.

It is automatically turned ON when the TCS-V430A detects a video signal input on any one of the 3 External inputs.

•POWER OFF: Press TV POWER key when there is no video signal from any input.

NOTE: As long as there is a video signal detected on any of the external inputs, the unit cannot be turned off. Once the unit is turned on manually, it will not turn off automatically even if there is no video signal.

OTHER FEATURES

Reset Switch

The reset switch, located on the side of the unit, is for returning the unit back to its original factory settings.

All memory contents will be erased and all settings on the unit will return to their factory defaults.

Power Indicator LED

The Power Indicator LED shows the unit status as follows:

•	POWER ON:	Always ON; Unit is active.
•	STAND-BY:	Blinking; Unit is OFF but receiving power from the iginition/acc
		line and is awaiting the Power ON command.
•	NO POWER:	Always OFF; The vehicle’s IGN/ACC line is OFF or the fuse has
		burned out. The unit cannot be turned ON.

Last Status Memory

TCS-V430A retains its current status and memory contents even when no power is supplied. Therefore, the unit remembers its last status so when power is restored it will continue where it left off.

Multiple Remote Signal Combination

The TCS-V430A can accept up to 3 remote inputs for user convenience. This enables remote control operation from whichever monitor that the passenger is watching.

The remote signal can be connected directly from any ALPINE Monitor product that has a built-in remote eye. The External Remote Eye supplied with TCS-V430A can be used for other monitor brands.

14