3M 325 owner manual Processing Items, When the Mediacheck is part of a SelfCheck System V-Series

Processing Items

This section consists of two procedures. The first describes how to use the Mediacheck when it is part of a SelfCheck™ System V-Series system. The second describes how to use it when it’s operating in standalone mode.

Do not place audiocassettes inside the Mediacheck.

When the Mediacheck is part of a SelfCheck System V-Series

1Follow the prompts on the V-Series touch screen to begin the check-in or checkout process. Mediacheck switches are disabled when the unit is part of a SelfCheck System V-Series.

2When the touch screen prompts you to place the item in the Mediacheck, and the Mediacheck status lights flash green, insert the item in the unit.

The Mediacheck lights stop flashing and turn solid when the unit senses the library item.

When the check-in or checkout operation is complete, the Mediacheck and

the SelfCheck System will each produce a sound, indicating that the operation is complete.

3Remove the item from the Mediacheck.

Standalone Mode

When you select an operating mode, the Mediacheck remains in that mode until you change it.

1Choose a mode.

Mode Action

Check-in	Press the Check-inbutton	.
Checkout	Press the Check-outbutton		.

2Insert items through the front of the unit and toward the back until the items are processed.

When an item is processed the following occurs:

The status lights turn green until the item is removed from the Mediacheck.

The Mediacheck produces a short “beep.”

3Remove the item from the Mediacheck.

15