Programming Device Control

CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 8

The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box. To control devices other than the default brands, perform the fol- lowing steps; otherwise skip this section:

1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2.On the remote control,press a device key once (i.e., DVD/VCR,

CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After program- ming a VCR Combo device, you will be able to control channel selec- tion, volume, and VCR functions.

NOTE: To program control of a DVD Player, DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCR once. After pro- gramming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3.Press and hold SET until the LED (red light) blinks twice, then release SET.

4.Use the Manufacturer’s Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed cor- rectly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.

5.Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn’t work, try

Searching For Your Code on next page.

NOTE: If the device does not have a POWER key, press PLAY.

6.Repeat steps 1 through 5 for each device you want to con- trol. For future reference,write down each working device code in the following boxes:

DVD/VCR Code:

Device Type:__________________

CBL/SAT Code:

Device Type:__________________

TV Code:

Device Type:__________________