Sunwave Tech SRC-3310/9320 manual IR Learning

Page 51

Problem	Solution
A button of your	Some remotes issue multiple commands
existing remote	when a button is held down. Please be
performs two or	sure to teach different buttons of SRC-93
more functions	SERIES for these different commands.
	Each button of SRC-93 SERIES can only
	learn one command.
The LCD screen	The SRC-93 SERIES is preset automatically
turns off.	to switch the LCD off after the Power
	Down time. Just tap the LCD screen or
	any button to turn the SRC-93 SERIES
	back on again. You can also reset the
	Power Down time period. (page 41)
IR LEARNING	Replace batteries in the SRC-93 SERIES
cannot be made	and the remote you are trying to learn
successfully.	from.
	Keep distance between remotes to
	about 2~4 inches.
	Do not learn near an incandescent
	lamp.
	Memory capacity is full (56 keys for each
	of 16 models).
	The learning process has no errors, but
	you still can’t control your AV devices:
	repeat the learning procedure again. If
	you still can’t solve the problem, use the
	code collection feature and email
	codes to Sunwave. (page 24)
	Original remote might not be
	compatible with learning procedure.

47

Image 51

Contents 031021 SRC-9310/9320Preface Table of Contents Controlling Devices Introducing the SRC-93 Series Alkaline BatterySRC-93 Series Features Following list identifies the SRC-93’s key featuresUnpacking the SRC-93 Series Front and Rear Views Identifying ComponentsGetting Started Features OverviewPage Installing Batteries Installing BatteriesBattery Tips and Precautions Battery Low IndicatorPlease read the following instructions carefully Touch Screen PrecautionsTouch Screen Turning the Touch Screen OnTouch Screen Buttons Rubber ButtonsConfirm Menu Entry by Pressing Numbers MenusMenu Description Setup MenuMacro Menu Delete MenuCreating a New Device Setting Up the SRC-93 Series to Control a DevicePress and hold the Setup button on Touch Screen Choosing a DeviceRe-Labeling Devices Modifying an Existing DevicePress the OK button to confirm Changing Touch Screen Layout Programming Infrared Codes Touch the button that you wish to changePress OK to confirm your changes Using Manufacturer Codes To use manual entry There are two ways to program the manufacture codesTo use automatic search Power button or Auto button to stop the automatic searchBefore Using the Learning Function Using the Learning FunctionLearning from Another Remote Control Rubber Keys Press and hold the Setup button on the Touch ScreenSoftKey Collecting Unrecognized Infrared Codes All unrecognized codes should be sent to this addressTo collect unrecognized codes Select the key you want to erase Deleting a Specific KeyDeleting a Device Press and hold the Delete button on the Touch ScreenSelect the device you wish to delete To delete a device from the SRC-93 Series follow these stepsControlling Devices Selecting Device to ControlChanging Touch Screen Controlling the Device Using the AUX KeyCreating and Using Macros Introduction to MacrosCreating a Macro Sequence Set up the macro using the following steps Press OK to save the Macro Deleting a Macro Using MacrosOther Features Using TimersSRC-93 Series has the following additional features Press and hold the Macro button on the Touch Screen Setting Up a New TimerUsing Quick Channel Lists When finished press the Exit key to leave the Macro MenuUse the arrow keys to select the time Setting up Quick Channel Lists Press Exit when finished and leave the Delete menu Deleting Channels from a Quick Channel ListPress and hold the Delete button on Touch Screen Using Quick Channel Lists Transmitting System SetupTo use sleep mode Using Sleep ModeEnter the year, month, and date first Press OK when finished Now set the hour, and minutesDisplaying Version Number Date and ClockUse the arrow keys to set the backlight period Power Down Time PeriodUse the arrow keys to set the power down time Backlight On Time PeriodUse the OK button to toggle the beep from on to OFF Resetting to Factory DefaultsPress OK to reset the SRC-93 Beep TogglingModel SRC-9310 SRC-9320 Appendix a Specifications Appendix B Accessories SLC-2080 USB cable Problem Solution Appendix C TroubleshootingProblem Solution IR Learning