Valve Operators, Trouble-Shooting | Pentair CP-2000 specs

TEMPERATURE CONTROL :

Separate electronic controls are provided for POOL and SPA heating. Each control incorporates the following :

THERMOSTAT Dial :

Used to preset your desired water temperature.

As long as the Heat Select Switch is not in the "OFF'position, the water will heat up to the preset temperature whenever the filter pump is running.

Heat Select Switch :

It is possible to heat your spa and swimming pool using solar energy, conventional heat, or a combination of both. However, no heating will take place unless the filter pump is running:

SOLAR Position:	Allows heating with solar only.
S.PREF Position:	Allows preferential heating with solar, but automatically switches to
	conventional heating when solar energy is unavailable.
HEATER Position: Allows heating with gas or electric heater only.
	Note: If you are heating the swimming pool (and also the spa in some
	custom applications), the solar system may also contribute to the
	conventional heat whenever solar energy is available.
OFF Position:	Allows no heating.

WATER TEMPERATURE Display :

Whenever the filter pump is running, the precise water temperature will be displayed in degrees Fahrenheit.

Pool temperature will be displayed during pool circulation, and spa temperature displayed during spa circulation.

Note: Filter pump must be running in order to provide accurate temperature display.

VALVE OPERATORS

Your control system is designed to actuate two motorized valves, which automatically rotate between pool and spa filtration whenever the SPA Button at the CP-2OMl is activated.

A motorized valve may also be used to automatically divert the flow of water through your solar panels whenever solar energy is available.

These Valve Operators are also activated by the FLOW CONTROL and SOLAR CONTROL Switches at the LX-10 Service Center.

Your system may also include additional motorized valves for custom hydraulic applications, such as a fountain or waterfall, or (in lieu of a booster pump) to activate your pool cleaner.

SINGLE OCCURRENCE PROGRAM :

Occasionally, you may w~shto use your spa at a time which is different from your normal daily program.

In this instance, it is poss~bleto enter a "once only" program step which will occur within the following 24 hour period without having to reprogram the daily equipment sequence. The "once only" program will automatically be canceled once the Clock reaches its next

program step.	I	+
Push PROGRAM Button to put the Clock into		TIME CONTROL
Program Mode.
"PROG" will appear on the right of the Display.
Continue to push PROGRAM Button until a
flashing "ONCE'appears.
Enter the time that you wish to activate the spa		Mill O U R SPA AUXI
(11:00 pm in our example) by pushing HOURS		Mill O U R SPA AUXI
(11:00 pm in our example) by pushing HOURS
and MINUTES Buttons.
Push SPA Equipment Button.
"ON" will appear directly above the SPA and	\	I
"ON" will appear directly above the SPA and

FILTER Buttons.

Push P R O G W Button to lock-in program.

Remember to manually turn off the spa after use, otherwise it may run all night until the Clock reaches its next program step.

EIGHT PROGRAM STEPS :

If the standard six program steps are insufficient for your particular programming requirements, it is possible to modify the Clock so that eight program steps may be entered.

Consult the Installation Manual for details.

TROUBLE-SHOOTING

GENERAL :

1.Check all circuit breakers at the electrical supply panel.

2.At the LX-10 Service Center, ensure that SYSTEM CONTROL Switch is in the "AUTO position, all MANUALCONTROL Switches are in the "OFF" position, FLOW CONTROL Switch is in the "POOL position, SOLAR CONTROL Switch is in the "AUTO" position, and OUTDOOR REMOTES Switch is in the "ON" position.

NOTHING OPERATES :

1.Check 3 amp circuit breaker which is located above faceplate in LX-10 Service Center Tripped circuit breaker is indicated by a white tab. Push to reset.

2.If circuit breaker continues to trip, refer to a qualified Service Company.

3.At the LX-10, turn OUTDOOR REMOTES Switch to the "OFF" position.

If the equipment can now be operated, there may be malfunction at your Spa-side Remote Control.

CP-2000 specifications

The Pentair CP-2000 is an advanced water purification system designed to deliver high-quality drinking water for both residential and commercial applications. With its state-of-the-art technologies, the CP-2000 offers an innovative solution to meet the demand for clean and safe water. This system is especially recognized for its efficiency and effectiveness in removing various contaminants from water sources.

One of the standout features of the Pentair CP-2000 is its multi-stage filtration process. The system incorporates a series of filters that work in tandem to effectively reduce sediments, chlorine, heavy metals, and other harmful substances. Each stage of filtration is carefully engineered to ensure optimal purification, producing fresh and great-tasting water.

The CP-2000 utilizes advanced reverse osmosis technology, which is a hallmark of its purification capabilities. This method involves forcing water through a semi-permeable membrane, allowing only clean water to pass through while blocking contaminants. The result is water that is significantly purer than standard tap water. Additionally, the system also features a post-carbon filter that further polishes the water, enhancing taste and odor.

Another key characteristic of the CP-2000 is its user-friendly design. The system is equipped with a digital display that provides real-time information on filter life and system performance. This ensures users can stay informed about their water quality and allows for timely maintenance. The CP-2000 also includes an automatic shut-off feature that helps conserve water when the system is not in use.

In terms of installation, the Pentair CP-2000 is compact and designed for ease of integration into existing plumbing systems. Its modular design allows for straightforward replacement of filter components, making maintenance hassle-free. This attribute is particularly beneficial for users who may not have extensive technical knowledge.

The energy-efficient operation of the CP-2000 is another noteworthy aspect. By minimizing power consumption, this system not only supports sustainability goals but also contributes to lower utility bills. Pentair has engineered the CP-2000 to function quietly, ensuring that it operates without disrupting daily activities.

Overall, the Pentair CP-2000 represents a significant advancement in water purification technology. With its robust filtration capabilities, ease of use, and energy efficiency, it stands out as a reliable solution for those seeking to enhance their water quality. Whether for home or business, the CP-2000 is dedicated to delivering exceptional performance, ensuring access to clean and safe drinking water.