SETTING THE SLEEP TIMER
The Sleep Timer automatically turns off the TV after the time you set. Press the TV button, then follow the instructions below to set the Sleep Timer:
1.Press and hold TIMER until the LED indicator lights steadily. Release TIMER button.
2.Use the number buttons to enter the sleep time required
(1 to 99 minutes).
3.Press ENTER to confirm the setting.
Note: Make sure you leave the remote pointing at the TV to ensure it turns off the TV at the time you set.
HOME AUTOMATION
The first thing you need to understand is that there are two different devices you need to control your house; Controllers and Modules. Any light or appliance that you want to control is plugged into a Module and that Module is then plugged into a standard AC outlet.
Modules receive commands from Controllers. Examples include the Lamp Module (sold separately). The Transceiver Module (also sold
separately) is another example (although it also doubles as a Controller as described later).
Controllers are plugged into standard wall outlets and send commands to Modules over your existing electrical wiring in your house without affecting your electricity in any way.
The Transceiver Module works as a Controller when it is used with a remote control such as the
over your existing house wiring to a Module which receives the signals and executes the command. The Remote uses radio frequency (RF) signals
to send commands to the Transceiver Module. RF signals can go right through walls, so you can use the Mouse Remote to control lights or appliances from anywhere in your home.
36 | 37 |