X10 Wireless Technology MK19A manual Fit a Wireless Wall Switch

Use a controller to trigger the	Remote	Chime
Remote Chime Module SC546 to		11•		•	1		•5
			•15			•	3
call Dad up for dinner, or warn		13
		M• O	•	A	• C•
			•	9	•	7
people you’re about to turn on the			UNIT
		HOUSE				E
		•
		K		• G	•
		•	I
sprinkler.

			Fit a Wireless Wall Switch
	ON	BRIGHT	RW724 anywhere you need an
			extra switch - with no wires.
OFF		DIM	Sends commands to the
			Transceiver Module just like a
RF Wall	Switch		remote.

Use the isolated contacts on the	ON		M	E
Universal Module UM506 to control	9
	1			OFF
	13			A
pool pumps, sprinklers, drapes and		5
			I
other low voltage equipment.	MOMENTARY
	UNIVERSAL	MODULE
	CONTINUOUS
Includes built in warning beeper.		SOUNDER ONLY
			SOUNDER & RELAY
			RELAY ONLY

1	ON 2	Switch entrance or garage lights on
ON		from your car with the convenient
		Keychain Remote KC674.

The PowerFlash Module PF284	TEST	5	M			E
connects to dry contact or low					ALL
	1					UNITS OFF
	13				A
voltage alarm terminals on your	9
burglar alarm system and flashes					I
	POWERFLASH	INTERFACE
X-10 controlled lights when it is	INPUT		1		2 3
	A B			MODE
triggered.

						Plug in a Heavy Duty Module
HOUSEI		•	9	•	5	HD245 to control 220V appliances
•	A	•
M		E	• 1		•
•	•	13				such as air conditioners and water
		UNIT
Heavy Duty						heaters.
Appliance
		Module

Use the Mini Timer MT10A to program up to 4 X-10 Modules to go on and off up to twice a day.

TROUBLESHOOTING

The Transceiver Module doesn’t respond to the remote:

•Check the House Code of the Transceiver Module is set to A. If you have changed the Housecode on the remote (see p. 43), check that it matches the Housecode on the module.

•Press the ON/OFF button on the front of the Transceiver Module to confirm it operates the equipment connected to it.

The Transceiver Module works, but other modules don’t respond:

•Check that the module has the same Housecode as the Transceiver Module.

•Try plugging the Module into a different outlet.

The Mouse Remote won’t control your A/V equipment, or doesn’t work at all:

•Use manual controls or the original remote control to confirm the equipment is working properly.

•Be sure you pressed the device key for the device you want to control.

•Re-enter the code for your A/V product from the code listings on pages 23 through 32.

•Try searching for the code as described on page 34.

•Replace the Mouse Remote’s batteries.

The Remote won’t control my audio CD player:

•The CD key on the Mouse Remote controls the CD player in your PC. To control an external audio CD player set it up under the AUX key. Press Setup, then AUX, then CD, then enter the code from the code listings under the heading CD Codes (page 30- 31).

46 47