Clifford G4102X manual Turning on the rear defogger, Valet take-over

Page 27

➤Turning on the rear defogger

The rear defogger (if connected) is programmed to automatically activate when remote start is turned on. If the interior cabin temperature is above 55˚ F the defogger will not activate.

To manually activate the rear defogger after remote start is on:

•Press four times, and then press . The parking lights flash 4 times to confirm the defogger activation.

➤Valet take-over

The Valet take-over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you want to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on.

To perform Valet take-over:

1.Before turning Off the engine, press and release the button on the transmitter.

The parking lights flash one time to confirm that valet -take-over has been initiated Then wait a few seconds.

2.Turn the ignition key to the Off position (The engine remains running).

3.Exit the vehicle and lock the system with the remote.

The engine runs until the pre-programmed time elapses or a shut-down input is received.

Note: To enable valet take-over with a manual transmission, open the door when going into MTS mode. The parking lights flash five-times to confirm entry into valet takeover. After you exit the vehicle you can lock the system with the remote and the car remains running. If the vehicle shuts down when locking, then the unit did not enter the valet take-over mode.

© 2008 Directed Electronics. All rights reserved.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Remote Start Keyless Entry Model Owner’s Guide Page Contents Page Government regulations Directed Electronics. All rights reserved Directed Electronics. All rights reserved Directed Electronics. All rights reserved Important information Your warrantyReplacement remote controls What’s includedSystem maintenance Low battery indicatorBattery replacement Two car operation Way remote Transmitter configuration Function shift Feature listRuntime reset Smart start Using the system Locking the vehicleUnlocking the vehicle Panic Mode Valet modeRemote feature programming Overriding the optional starter kill Using the remote start Manual transmission vehicles Timer mode Turbo timer mode Smart start activation To activate Smart Start mode Valet take-over Turning on the rear defoggerSafety features Optional starter anti-grind circuitryDisabling the remote start system Remote start DiagnosticsLocking UnlockingPower saver mode Owner recognitionRapid resume logic Programming options Convenience expansions Glossary of terms Directed Electronics. All rights reserved Locking To lock press for one second. The doors lock Quick reference guideOutput To disable the remote start system Limited lifetime consumer warranty Directed Electronics. All rights reserved Page Company behind this system is Directed Electronics

G4102X specifications

The Clifford G4102X is a highly regarded vehicle security system designed to provide comprehensive protection against theft and unauthorized access. Known for its advanced features and robust technology, the G4102X is an ideal choice for those looking to enhance the security of their vehicle.

One of the standout characteristics of the G4102X is its dual-zone shock sensor. This innovative technology detects impacts and vibrations, allowing the system to differentiate between minor disturbances and serious threats. As a result, the alarm can be tailored to minimize false alarms while ensuring maximum protection against potential break-ins.

Another key feature of the G4102X is its two-way LCD remote. This remote not only allows users to set or disable the alarm from a distance but also provides real-time feedback. Users are notified of any disturbances, making it easier to respond quickly in the event of suspicious activity. The range of the remote is impressive, ensuring that users can maintain control of their security system even from a distance.

The Clifford G4102X also comes equipped with the state-of-the-art Ignition Disabler function. This technology prevents the engine from starting without the proper authorization, significantly reducing the likelihood of vehicle theft. In addition to this, the system features a starter kill relay, which adds another layer of security by preventing the engine from starting even if the thief manages to bypass the alarm.

In terms of installation, the G4102X is designed for ease of use. The straightforward installation process ensures that both professional installers and DIY enthusiasts can set up the system with relative ease. Its compatibility with various vehicle types makes it a versatile option for securing cars, trucks, and SUVs alike.

The Clifford G4102X also boasts an array of customization options. Users can tailor the settings to their preferences, whether it be adjusting the sensitivity of the shock sensor or selecting specific alert tones. This level of personalization enhances user experience and ensures that the system meets individual security needs.

In conclusion, the Clifford G4102X stands out in the vehicle security landscape thanks to its dual-zone shock sensor, two-way LCD remote, and advanced ignition disabler technology. Its user-friendly installation and a range of customization options make it a practical and effective choice for those seeking to protect their vehicles against theft and unauthorized access. Investing in the G4102X is a step toward peace of mind for vehicle owners, ensuring that their prized possessions are safeguarded at all times.
Top Page Image Contents