Protected Valet Mode

4. Press the remote control Cbutton for 1-2 seconds to secure your vehicle.

To Deactivate:

1.When you return to the vehicle, press the remote controlDbutton for 1-2 seconds. The doors will unlock.

2. Enter the vehicle (do not touch the brake pedal), turn the ignition key to the "ON" position and then press the brake pedal. The parking lights will shut off and you will now be able to drive the vehicle.

You should place your system in Protected Valet Mode whenever your vehicle is being serviced by mechanics, car wash personnel or driven by valet parking attendants. While in the Protected Valet Mode, all remote starter functions are bypassed to prevent unauthorized or accidental operation. If a remote start is attempted, the parking lights will flash 4 times and the vehicle will not start. Remote controlled door lock/unlock and trunk release will still operate.

To Turn on Protected Valet Mode:

1.Turn the ignition key to the "ON" position or start the engine.

2.Flick the valet switch to the "ON" position.

3.The LED will turn on solid red to indicate the system is in the Protected Valet Mode.

4. Turn the ignition key to the "OFF" position.

To Turn off Protected Valet Mode:

1.Turn the ignition key to the "ON" position or start the engine.

2.Flick the valet switch to the "OFF" position.

3.The LED will turn off to indicate the system is no longer in the Protected Valet Mode.

4. Turn the ignition key to the "OFF" position.

AviStart 4001 Owner’s Manual 1099