5
It a button is pressed, the LED Icon will be flashed rapidly. Also, if the signal was sent successfully, the remote will beep and the LED icon will flash.
If the signal fails, the remote will beep rapidly.
Query( 
+ 
2 Sec) : When This function is activated, if any of the
doors are still open, the 
Icon will be shown on the remote transmitter
Query( 
+ 
2 Sec) : If the engine is still running, icon will be shown on the remote.
Remote-Pager LED Functions
|
| DISPLAY |
Paging Operation | LED ICON | |
Theft | Door |
|
Trunk |
| |
| Hood |
|
Shock | Storng |
|
|
| |
Sensor | Weak |
|
|
| |
R.P.S |
|
|
AUTO Arm/Disarm |
| |
| ICON | Explanation |
door,trunk.or hood,are open.
Indicates that the second stage shock sensor has been triggered
Indicates that the first stage shock sensor has been triggered
Indicates if your vehicle has auto- started properly or ignition on
6
Remote-Pager Learn Routine
The Compustar system will allow up to three remotes to be programmed to one vehicle. Please perform the following procedure to add or reprogram additional remotes.
Step1 : Activate Valet/Programming mode by manually turning the ignition on
and off five times (between Acc and On)
with car key within a 7 second period.
The parking lights will flash once with successful completion of this step.
Step2 : Within a 7 second period after cycling the ignition for the 5th time,
press the 
button . The car parking lights will flash once to confirm that the transmitter has been programmed. Continue program the additional remotes. The parking lights will flash two times when the programming mode is expired.
| Alarm Mode |
You can arm by pressing the | button for a 1/2 second. |
You can disarm by pressing the | button for a 1/2 second. |
Press buttons ( + ) for a 1/2second to make your car siren mute when arming or disarming your vehicle. Keep in mind that your car siren will still activate for all other modes (i.e. panic, alarm, shock sensor) regardless of whether or not your car siren is in mute mode. The car siren will be mute only when arming or disarming your vehicle. In alarm mode, the starter kill function (this maybe an optional feature provided by your installer) is activated. This feature disengages the starter mechanism on your car that prevents you from starting your car even with a manual key when
your vehicle s alarm mode is activated.