9
Valet Mode
The only feature that operates in valet mode is the keyless entry function.
Valet Mode is very useful when loaning your
vehicle or having it serviced. In order to enter Valet mode, press Buttons ( 
+ 
) simultaneously for a 1/2 second.
In order to manually enter Valet Mode, insert your car key into the ignition and turn the ignition on and
off (between ACC and ON) five times within 7 seconds
You can exit Valet Mode only by pressing buttons ( 
+ 
) simultaneously for a 1/2 second.
Safety Shut Down Features
Compustar 2WSHR LED system has several shut down safety features. The following actions will shut down the engine or prevent the car from auto- starting: Opening the engine hood, Pressing the brake or Valet mode
is turned on.
RPS (Remote Paging System)
The optional RPS is a feature that allows an individual to page the owner of a vehicle by simply tapping on the front windshield of the car. RPS is automatically turned on upon activating alarm mode (pressing the 
button for a 1/2 second) on the Compustar 2WSHR LED,
The RPS module can be activated by tapping a manual key producing a
10
OPTIONAL PROGRAMMABLE FEATURES
These additional programmable features can be programmed to the Compustar system by your authorized CompuStar dealer.
Ignition Lock
This programmable option enables your vehicle to automatically lock the doors when the brake pedal is pressed after starting the vehicle with a key.
In addition, the vehicle will automatically unlock the doors upon pulling the key out from the ignition. However, if the emergency brake wire was installed, the vehicle will unlock upon the emergency brake is set if the engine is still running with the key. This option must be chosen at the time of installation.
Passive Arming
You can turn this function on or off by pressing the buttons ( 
+ 
) for a 1/2 second. When set to passive arming, your security system will arm automatically 30 seconds after all the doors are closed. There are two types of passive arming that can be programmed by your Compustar dealership:
(1) passive arming with passive lock and (2) passive arming with active lock.
Passive locking means the door will lock when the system passively arms. In the default factory setting, the system is armed and locked actively, which means the system will only arm/lock when the
Note :
1.If you select both Auto Arming and Passive Arming, Auto Arming takes priority over Passive Arming.
2.If you select Passive Arming with Active Lock in the programming option, you are also selecting Auto Arming without Auto Lock. Consult your installer.