CompuSTAR 2WFMR Important Requirements to activate Reservation Mode, Canceling Reservation Mode

Page 9

TRANSMISSIONS. Reservation Mode must be engaged each and every time you leave your manual transmission car in order to auto-start the vehicle.

Note: The system is not recommended for vehicles with removable tops.

Important Requirements to activate Reservation Mode

?? The transmission must be in the NEUTRAL position.

?? The vehicle windows must be rolled up.

?? Do not set the reservation mode with people in the vehicle.

?? Do not auto-start the car with people in the vehicle.

Activating Reservation Mode (MANUAL TRANSMISSION ONLY)

Step 1: After arriving at your destination, and BEFORE TURNING YOUR ENGINE OFF, place the transmission in the Neutral position.

Step 2: Remove your foot from the foot brake.

Step 3: Activate the parking brake.

Step 4: Remove the key from the ignition. The engine will remain running.

Step 5: Exit the vehicle and close the door within two minutes after activating the parking brake. The engine will shut off and reservation mode for the remote starter is now complete.

Your vehicle is now ready for auto-starting. However, the reservation mode will be cancelled if the door is opened or the CompuStar system is put in Valet mode after the reservation has been set. Once cancelled, you will have to start the vehicle with the manual key and repeat the above 5 steps if you want to restore reservation mode.

Important! If you try to auto-start the vehicle when reservation mode has not been set or turned on, the auto-start feature will not work. When you press the auto-start button, the remote beeps three times, the car parking lights will flash five times and the siren chirps three times. A couple of seconds later, the cause for the error will be indicated by the number of times the car chirps and parking lights flash. See Page 11 for error messages.

Canceling Reservation Mode

© 2001 Firstech, Inc. Page 9

Image 9
Contents USER’S Guide Table of Contents Safety Information Explanation CompuGLO color LCDButton Pressed For Function Remote-Pager Button Functions+II +IIIRemote -Pager Learn Routine Alarm ModeAuto -Start Function Dual Stage Shock SensorReservation Mode manual transmission only Diagnosing problems with Auto-StartImportant Requirements to activate Reservation Mode Activating Reservation Mode Manual Transmission onlyCanceling Reservation Mode Reason Error MessagesTrunk Release Query FunctionValet Mode Panic ModeTimer Start Mode Safety Shut Down FeaturesRPS Remote Paging System Ignition Lock Auto ArmingPassive Arming Optional Installation Features Optional Auxiliary 1 & Auxiliary Limited Lifetime Consumer WarrantyYour Warranty