Rear Panel Jacks

Hitachi 60DX10B, 43GX10B, 50GX30B, 50DX10B important safety instructions Rear Panel Jacks

STOP

REAR SPEAKER

VHF/UHF

SP. MATRIX

SURROUND

EXT.

AUDIO TO HI-FI

4 1

CONNECT ONLY 8 OHM SPEAKERS

DO NOT SHORT CIRCUIT

THESE TERMINALS.

(Such damage is NOT COVERED by your television warranty)

S-VIDEO S-VIDEO

VIDEO	VIDEO	Y/VIDEO	VIDEO
(MONO)/L	(MONO)/L	PB (MONO)/L
			L
		PR
R	R	R	R
AUDIO	AUDIO	AUDIO	AUDIO
INPUT 1	INPUT 2	INPUT 4	MONITOR
INPUT 1	INPUT 2	INPUT 4	OUT
			OUT

aANTENNA INPUT

Use an ÒFÓ type coaxial cable to connect an antenna or cable TV (CATV) output to this rear jack.

bAUDIO/VIDEO INPUTS 1, 2, 4

The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert the audio cable into the left audio jack.)

NOTE: You may use VIDEO or S-VIDEO inputs to connect to INPUT 1 or 2, but note that only one of these may be used at a time.

cMONITOR OUT

These jacks provide fixed audio and video signals which are used for recording.

dAUDIO TO HI-FI

These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the televisionÕs main volume.

eS-VIDEO INPUTS 1 and 2

INPUTS 1 and 2 provides S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.

fCOMPONENT VIDEO: Y-PBPRINPUT 4

INPUT 4 provides Y-PBPRjacks for connecting equipment with this capability, such as a DVD player.

NOTE: Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TVÕs PB input and the components R-Y output to the TVÕs PR input.

Your component outputs may be labeled Y-CBCR. In this case, connect the components CB output to the TVÕs PB input and the com- ponents CR output to the TVÕs PR input.

It may be necessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-PBPRinputs. To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPRjacks.

Y-PBPRcan only receive 480i signals.

Input 4 (Y/VIDEO) can be used for standard video input.

gSPEAKER MATRIX SURROUND Switch

Use this switch to choose between the surround and external speaker features. See page 17 for AUDIO SYSTEM SETUP. The TVÕs Internal Speakers will be switched off when ÒEXT.Ó is selected.

hREAR SPEAKER Terminals

These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the remote control main volume buttons. Use speakers with 8 Ohm impedance only.