Hitachi 43GX10B, 50GX30B TV Power button, MENU, SELECT, Cursor buttons, Last Channel button

HOW TO USE THE REMOTE TO CONTROL YOUR TV

aTV POWER button

Press this button to turn the TV set on or off.

bSTATUS button

Use the STATUS function to check the channel being received, or if it has stereo (ST) or second audio (SAP).

Audio				CHANNEL ID				Video Input
	STEREO
Broadcast			ANT 10
							VIDEO 1
	ST/SA		YUTA		Time		DISC	When a laserdisc
			10:00pm				10:00pm	player is connected
		PIP ANT 12				PIP ANT 12
					Sub Picture
					Source
			SPORT				SPORT

Theater

Mode

cMENU, SELECT, CURSOR buttons

All On-Screen Display features can be set or adjusted by using these buttons. The MENU button will start the On-Screen Display.

The SELECT button will select different features when MENU is pressed.

The CURSOR buttons will highlight functions or adjust different features when MENU is pressed. The CURSOR button will move PIP position when PIP is on.

CURSOR buttons will also give you acces to FAMILY FAVORITES On-Screen Display.

dCHANNEL SELECTOR buttons

Enter two or three numbers to select channels. Enter Ò0Ó first for channels 1 to 9. For channels 100 and above, press the Ò1Ó button and wait for two seconds before pressing the last two digits of the channel.

Channel selection may also be performed by pressing CH up (G) or down (H).

You may also use these buttons for channel scanning. Press and hold the CH up (G) or down (H) buttons and the TV will start quickly scanning through the channels. Release the CH up (G) or down (H) buttons when the TV scans to the channel you wish to watch and the TV will tune to that channel.

NOTE: The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (see page 33)

eLAST CHANNEL button

Use this button to select between the last two channels viewed. (Good for watching two sporting events, etc.)

ANT A 28

MINA

LAST CH

ANT A 30 MI

20