One for All URC-3710 instruction manual Search Method, Example To search for your TV code

Search Method

--> If your device does not respond to the ONE FOR ALL after you have tried all the codes listed for your brand.

--> The Search Method may also work if your brand is not listed at all.

The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL.

Example: To search for your TV code:

1 Switch on your television (not on standby) and aim your ONE FOR ALL at your TV.

2	Press and hold down the MAGIC key
	(for appraximately 3 seconds) until the

red LED (underneath the ON key in this example) blinks twice.

x2

The red LED will blink once, then twice.

3 Press 9 9 1. The red LED will blink twice.

4Next, press OFF.

-If you wish you may also search for your code using another function than “OFF”. Simply choose between 0, 1, 2, 3, VOL+, PLAY, STOP or MUTE instead.

5Aim the ONE FOR ALL at your Device. Now press CH+ over and over, until your e.g. Television switches off.

-Everytime you press the CH+ key the ONE FOR ALL will send out a POWER signal (the function you chose at step 4) from the next code contained in the memory.

-You may have to press this key many times (up to 150 times) so please be patient.

-If you skip past a code, you can go to the previous code(s) by pressing the CH- key.

-Remember to keep pointing the ONE FOR ALL at your Device while pressing this key.

6As soon as your Device switches off, press the MAGIC key to store the code.

-If your Device does not switch on pressing the ON key,

simply press the ON key, a number key or CH+ to switch your e.g. Television back on.

6 WWW.ONEFORALL.COM