Samsung LN437W instruction manual Connecting Cable TV and VCR, Cable without a Cable Box

Page 12

C o n n e c t i o n s

Connecting Cable TV and VCR

You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

If you want to connect cable, and you do not need to use a cable box:

Plug the incoming cable

1 into the ANT-A antenna ter- minal on the back of the TV.

Cable with a Cable Box that Descrambles All Channels

Find the cable that is con-

1 nected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT,” “VHF OUT,” or sim- ply, “OUT.”

Connect the other end of

2 this cable to the ANT A antenna terminal on the back of the TV.

Connecting a Cable Converter Box

This connection allows you to watch cable and premium channels. You should keep your TV selected to ANT-A so that you can use the TV features. When viewing premium channels, select ANT-B and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables.

Note: When you use a converter box with your TV, there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels.

Connecting a Cable Converter Box and a VCR

This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to ANT-A so that you can use the TV’s fea- tures. When viewing premium channels or recording with the VCR, select ANT-B (whichever chan- nel is vacant in your area), then use the converter box to change channels.

Caution: If you want to record one channel while watching another channel, a splitter (not included) must be added between the cable and ANT-A. One output of the splitter goes to ANT-A and the second output is connected to IN on the cable converter box.

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a S-VHS VCR, use the S-video connections and remove the video cable. Do not connect the video cable and the S-video cable to video1 simultaneously.

When you use a converter box with your TV there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels.

				22	23

Image 12

Contents Dlptv Dlptv Safety Instructions Important Safety InformationThank You for Choosing Samsung FCC Information System is connected to the TV, be sure the antenna or cableTable of Contents M S U N G Your New Wide TV Replacing the LampList of Features Checking PartsSide Panel Buttons Side Panel JacksFront Panel LED Indicators Indicator Light KeyRear Panel Jacks Remote Control Installing Batteries in the Remote ControlM S U N G Connecting VHF and UHF Antennas N n e c t i o n sAntennas with 300-ohm Flat Twin Leads Separate VHF and UHF AntennasConnecting Cable TV and VCR Connecting a Cable Converter BoxConnecting a Cable Converter Box and a VCR Cable without a Cable BoxConnecting a Camcorder Connecting a DVD PlayerConnecting to Y,Pb,Pr Connecting to audio and video jacksConnecting a DTV Set Top Box Connecting to R,G,BConnecting to DVI Digital Visual Interface Operation E r a t i o n Turning the TV On and OffViewing the Menus and Displays Selecting the Menu LanguageChannel Memory Selecting the Broadcast SourceStoring Channels in Memory Automatically Adding and Erasing ChannelsChanging Channels Selecting Your Favorite ChannelsSetting The On/Off Melody Labeling the ChannelsUsing Automatic Standard Picture Settings Picture ControlCustomizing the Picture Adjusting the Volume Using the Mute ButtonUsing AutomaticStandard Sound Settings Sound ControlSetting the Clock Setting the TimersSetting the On/Off Timer Viewing an External Signal Source Setting the Sleep TimerSelecting the Signal Source Remote Control VCR/DVD ButtonsSpecial Features Special Features Setting Up Your Remote ControlSetting Up the Remote to Operate Your VCR Setting Up the Remote to Operate Your Cable BoxRemote Control Codes Setting Up the Remote to Operate Your DVDVCR Codes Cable Box Codes DVD Codes Fine Tuning Channels Setting the Film ModeSelecting the Color Tone DNIeTM Digital Natural Image engine Digital Noise ReductionSetting the Blue Screen Mode Changing the Screen SizeMTS Settings Choosing a Soundtrack Special Audio OptionsDolby Virtual BBEAuto Volume Viewing Closed Caption InformationClosed Captions Selecting an External Signal Viewing Picture-in-PictureSelecting a PIP Screen Selecting a Signal Source Antenna or Cable for PIP Swapping the Contents of the PIP and Main imageChanging the Size of the PIP image Changing the Picture-in-Picture ChannelUsing the V-Chip Setting Up Your Personal ID Number PINSelecting the Sound Source Changing the Location of the PIP imageHow to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelinesE c i a l F e a t u r e s Parental guidance suggested PC Display Using Your TV as a Computer PC Display How to connect Your PC to the TVHow to Set up Your PC Software Windows only D i s p l a yHow to Set up Your TV as a PC display Display ModesPicture Quality Adjustment Frequency AdjustmentFine tuning Changing the Screen Size PC mode Aspect Supported settingsWide TV Wide PCAppendix Troubleshooting Care and MaintenanceUsing the TV in Another Country SpecificationsM o