Philips V200 manual Neonatal Option, Neonatal option Requirements, 13-97

Chapter 13

Options and Accessories

Neonatal Option

The Neonatal option allows the Respironics V200 Ventilator to ventilate intubated neonatal patients with an ideal body weight range of 0.5 - 6.5 kg (1.10 - 14.33 lb.) and an endotracheal tube I.D. range from 2.5 - 4.0 mm. The option provides pressure control in A/C, SIMV, and Apnea ventilation and also provides pressure support in SIMV and CPAP. The Neonatal Option is not available in VCV or NPPV modes.

System Requirements The Neonatal option requires the following software and accessories for proper use:

	Neonatal option Requirements
Respironics V200 Ventilator
Neonatal option loaded and enabled.
NOTE:	Ventilators with the Neonatal option software
	installed are identified by the option label
	located near the power switch.

Recommended Accessories	Part Number
Neonatal patient circuits (10 mm I.D.)
Fisher & Paykel reusable circuit	900MR780
Hudson RCI disposable circuit	780-07
Fisher & Paykel disposable circuit	RT131
	(RT125 is EU equivalent)
22mm, Male x Male Connector (Refer to Figure 13-52.)	1002505
coupling, Straight Silicone	500-1000-43

NOTE:	We recommend using approved circuits or equivalent when connecting
	to the ventilator.
	Table 13-20: Neonatal Option Requirements

Filter Silicone coupler Connector Circuit

Figure 13-52: Circuit to Filter Connection

REF 1057983 A Respironics V200 Ventilator Operator’s Manual 13-97