Philips V200 manual Initial Neonatal Settings, Initial Patient Settings, Ranges, 13-100

Chapter 13

Options and Accessories

Initial Neonatal Settings

When the ventilator is first powered on and the neonatal patient type is selected, the initial startup settings found in Table 13-21: are applied. Each subsequent startup will display the settings from the last use of the ventilator of that patient type with the exception of O2. The last O2 setting used on the ventilator will remain regardless of patient type.

Initial Patient Settings, Ranges

Ventilation Settings	Value	Ranges
Ventilation Mode	PCV - SIMV	AC, SIMV, CPAP
Rate	20 BPM	1	-	150 BPM
Pressure	10 cmH2O	5	-	100 cmH2O
I-Time	0.3 Sec	0.1		- 2.0 Sec
PEEP	3 cmH2O	0	-	35 cmH2O
PSV	0 cmH2O	0	-	100 cmH2O
I-Trigger	2.0 L/Min	0.3		- 10.0 L/Min
E-Cycle	25%	10		- 80%
Rise-TIme	0.2 Sec	0.1		- 0.5 Sec
O2 %	same as last O2 setting	21		- 100%
Apnea Rate	20 BPM	1-		80 BPM

Alarm Settings	Value	Ranges
High Press	30 cmH2O	10 - 105 cmH2O
Low Insp Press	5 cmH2O	3	- 105 cmH2O
Low Peep	0 cmH2O	0	- 35 cmH2O
Low Vt Mand	10 mL	0	- 300 mL
Low Vt Spont	3 mL	0	- 300 mL
High Rate	150 BPM	0	- 150 BPM
High VE	1.2 L	0.00 - 5.0 L
Low VE	0.3 L	0.00 - 5.0 L
Apnea	20 Sec	10 - 60 Sec
I-Time Too Long	sounds after 1.5 Sec of spont
	breath

Table 13-21: Initial Neonatal Patient Settings

13-100 Respironics V200 Ventilator Operator’s Manual REF 1057983 A