Options and Accessories
REF 1057983 A Respironics V200 Ventilator Operator’s Manual 13-91
Chapter 13
• Turn the knob to highlight EXIT and then press the knob. Turn the
knob to highlight EXIT again and then press the knob.The monitor
returns to the SETUP screen.
The ventilator and the respiratory profile monitor will begin communication
within 60 seconds.
RS-232
Communications The bidirectional communication between the respiratory profile monitor and
ventilator is initiated by the monitor. The ventilator recognizes the connect
request message from the monitor and responds.

Information Transferred from the Respiratory Profile Monitor to the

Ventilator

The respiratory profile monitor provides the ventilator with the data listed in
the following table. The monitor sends the average value for each parameter for
the previous 60 seconds.
Table 13-18: Information Transferred from the Monitor to the Ventilator
Information Transferred from the Respiratory Profile Monitor to the Ventilator
Data Description
CO-a Cardiac Output Average
NOTE: Available only when the Cardiac Output option is
installed.
SpO2O2 Saturation
ETCO2End Tidal CO2
VCO2Volume CO2
Vtalv Alveolar Tidal Volume
MValv Alveolar Minute Volume