Philips V200 manual Table A-1 Ventilation Report Sheet 6

Appendix A

RS-232 Communications Protocol

Ventilation Report (Continued)

Description	Example	Resolution	Range	Units	Comments
Measured I:E Ratio	1:4.1◆	0.1 for 9.9:1	4.1:1-1:99	N/A	The I:E Ratio
		to 1:9.9			display from the
		1 for 1:10 to			Patient Data
		1:99
					screen.
Measured Patient	0.0◆◆◆	0.1 for 0.0	0.0 - 140	LPM	The Pt Leak
Leak		to 99.9			display.
		1 for 100 to
		140

Measured Percent of 56.2 Breaths Triggered by

the Patient (NPPV Spont/T mode only; otherwise ◆◆◆◆◆◆)

0.1 for 0.0	0.0 - 100	%	The Pt Trigger
to 99.9			display on the

1 for 100	NPPV Monitor
	screen.

Monitored Oxygen	55.1◆◆	0,1 for 0.0	0.0 - 100	%	The % O2 display
Concentration		to 99.9			from the Patient
		1 for 100			Data Screen.
Ti/Ttot	0.23◆◆	0.01	0.00 - 1.00	N/A	The Ti/Ttot display
					from the
					Mechanics Patient
					Status Screen
Dynamic Resistance	5.43◆◆	0.01 for	0.00 - 400 cmH20		The Dynamic
		0.00 to		/L/Sec	Resistance display
		9.99			from the
		0.1 for			Mechanics Patient
		10.0 to			Status Screen
		99.9
		1 for 100
		to 400
Dynamic Compliance	19.2◆◆	0.01 for	0.00 - 350	mL/	The Dynamic
		0.00 to		cmH20	Compliance display
		9.99			from the
		0.1 for			Mechanics Patient
		10.0 to			Status Screen
		99.9
		1 for 100
		to 350
Peak Lung Flow	35.1◆◆	0.1 for -	-300 - 300	LPM	The Peak L-Flow
		99.9 to			display from the
		99.9			Mechanics Patient
		1 for -100			Status Screen
		to -300
		1 for 100
		to 300
Vital Capacity	450◆◆	1	0 - 9999	mL	Vital Capacity
					display from Vital
					Capacity Screen

Table A-1: Ventilation Report (Sheet 6 of 10)

REF 1057983 A Respironics V200 Ventilator Operator’s Manual Appendix A-7