Philips V200 manual Patient Data Screen, Patient Data Definitions Range, Units & Resolution

Chapter 8

Operating Instructions

Patient Data Screen

You can view the patient data screen (Figure 8-33)by pressing the PATIENT DATA button in the top bar. The format of this screen is the same in VCV, PCV, and NPPV. Table 8-7: “Patient Data Definitions: Range, Units & Resolution” summarizes the definitions, display ranges, and resolution for patient data parameters.

Figure 8-33: Patient Data Screen

Patient Data Definitions: Range, Units & Resolution

Parameter	Description	Display Range	Resolution
PIP	Peak Inspiratory Pressure	-20.0 to 130	0.1 for -20.0 to
	The maximum airway pressure	cmH2O (hPa)	99.9
	during inspiration.		1 for 100 to 130
MAP	Mean Airway Pressure	-20.0 to 120	0.1 for -20.0 to
	The average of airway pressure	cmH2O (hPa)	99.9
	during one full breath cycle.		1 for 100 to 130
Pe End	Pressure at End Expiration	-20.0 to 99.9	0.1
	The pressure measured at the	cmH2O (hPa)
	end of expiration.
Pi End	Pressure at End Inspiration	-20.0 to 130	0.1 for -20.0 to
	The pressure measured at the	cmH2O (hPa)	99.9
	end of inspiration (or at the end		1 for 100 to 130
	of Insp Hold if it is >0).
Tidal Vol.	Exhaled Tidal Volume	0 to 9999 ml	1
	The volume exhaled at each	(BTPS)
	breath. Compliance
	compensated (if enabled).

Table 8-7: Patient Data Definitions: Range, Units & Resolution (Sheet 1 of 2)

8-28 Respironics V200 Ventilator Operator’s Manual REF 1057983 A