Philips V200 manual 12-14, Iec

Chapter 12

Technical Specifications

Guidance and Manufacturer's Declaration - Electromagnetic Immunity

The ventilator is intended for use in the electromagnetic environment specified below. The user of the ventilator should assure that it is used in such an electromagnetic environment.

Immunity	IEC 60601	Compliance
Test	Test Level	Level	Electromagnetic Environment - Guidance
			Portable and mobile RF communications
			equipment should be used no closer to any part of
			the ventilator, including cables, than the
			recommended separation distance calculated from
Conducted			the equation applicable to the frequency of the
			transmitter.Recommended separation distance
RF
			Table 12-29: “EMC Declaration - Recommended
IEC			Distances”.
61000-4-6	3 Vrms150
						3.5
	kHz to 80	3Vrms	d =					P
	MHz outside			------
							V1
	ISM bandsa
	10 Vrms						12
		10 Vrms	d =					P
					-----
	150kHz to						V2
Radiated	80 MHz in
RF
IEC							12
			d =		-----			P 80Mhz to 800Mhz
61000-4-3	10 V/m
	80Mhz to	10 V/m					E1
							23
	2.5GHz		d =					P 800Mhz to 2.5GHz
					-----
							E1
			where P is the maximum output power rating of the
			transmitter in watts (W) according to the
			transmitter manufacturer and d is the
			recommended separation distance in meters (m).b
			Field strengths from fixed RF transmitters, as
			determined by an electromagnetic site survey,c
			should be less than the compliance level in each
			frequency range.d
			Interference may occur in the vicinity of equipment
			marked with the
			following symbol:

Table 12-28: EMC Declaration - Immunity

12-14 Respironics V200 Ventilator Operator’s Manual REF 1057983 A