Philips V200 manual Monitor Screen

Chapter 8

Operating Instructions

Patient Data Definitions: Range, Units & Resolution (Continued)

Parameter	Description	Display Range	Resolution
Spont VE	Spontaneous Minute Volume	0.00 to 99.9 L	0.01 for 0.00 to
	The spontaneous ventilation	(BTPS)	9.99
	normalized to one minute.		0.1 for 10.0 to 99.9
	Compliance compensated (if
	enabled).
Total VE	Exhaled Minute Volume	0.00 to 99.9 L	0.01 for 0.00 to
	The total volume exhaled by the	(BTPS)	9.99
	patient in one minute.		0.1 for 10.0 to 99.9
	Compliance compensated (if
	enabled.)
% O2	Delivered O2	0.0 to 110%	0.01 for 0.00 to
	One second average of O2		9.99
	sensor reading (if O2 sensor is		1 for 100 to 110
	installed).
Spont Rate	Spontaneous Respiratory Rate	0.0 to 150	0.1 for 0.0 to 9.9
	The respiratory rate of	Bpm	1 for 10 to 150
	spontaneous breaths.
Total Rate	Total Respiratory Rate	0.0 to 150	0.1 for 0.0 to 9.9
	The respiratory rate for all	Bpm	1 for 10 to 150
	breaths.
F/Vt	Rapid Shallow Breathing Index	0 to 150 Bpm/	1
	The ratio of the respiratory rate	L
	to exhaled tidal volume for
	spontaneous breaths.
I:E Ratio	I:E Ratio	9.9:1 to 1:99	0.1 for 9.9:1 to
	The ratio of inspiratory time to		1:9.9
	expiratory time.		one (1) for 1:10 to
			1:99

Table 8-7: Patient Data Definitions: Range, Units & Resolution (Sheet 2 of 2)

Monitor Screen

NOTE: Pt. Leak only appears on Patient Data block on Settings screen.

The monitor screen (Figure 8-34)is the default screen, and is automatically displayed if the screen has not been touched for 15 minutes. The screen can also be viewed by pressing the MONITOR button. The screen is shown in Figure 8-34.The patient data and settings displayed on this screen depend on the active breath type (Refer to Table 8-8: “Monitor Screen Settings Displayed” and Figure 8-34.)

REF 1057983 A Respironics V200 Ventilator Operator’s Manual 8-29