Upgrading the Software
Samsung call center at
1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the rear of the TV.
2 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.
4 | Press the ▲ or ▼ button to select USB, then press the ENTER button. | USB drive |
| |
| The message Scanning for USB... It may take up to 30 seconds. is displayed. |
|
|
|
5 | If the firmware on the USB is properly recognized, the message Upgrade version xxxx to |
|
|
|
|
|
| ||
| version xxxx? The system would be reset after upgrade. is displayed. |
| Setup |
|
| Press the ◄ or ► button to select OK, then press the ENTER button. The upgrade starts. | ▲ More | : On | ► |
| Please be careful not to disconnect the power or remove the USB drive while upgrades are | Function Help | ||
| SW Upgrade |
| ► | |
| being applied. |
|
|
|
| The TV will shut off and turn on automatically after completing the firmware upgrade. |
|
|
|
| Please check the firmware version after the upgrades are complete. |
|
|
|
➢ The firmware and upgrade process may be different by country and region. | Move | Enter | Return | |
|
| |||
|
|
|
| |
|
| SW Upgrade |
| |
|
| USB |
| ► |
Enter Return
Software Upgrade
Scanning for USB...
It may take up to 30 seconds.
Software Upgrade
Upgrade version XXXX to version XXXX ? The system would be reset after upgrade.