AUDIO
Advanced Settings
Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
Audio |
|
|
|
Treble |
| 50% |
|
Bass |
| 50% |
|
Balance |
| L | R |
Sound Enhancement |
| ||
Advanced Settings |
| ||
Move | SEL | Select |
|
CURSOR
Audio |
|
|
Advanced Settings |
| |
Audio Source |
| |
Stereo | Mono | 2nd Audio Prog. |
Internal Speakers |
| |
On | Off |
|
Auto Noise Cancel |
| |
Perfect Volume |
| |
Loudness |
|
|
Move SEL | Return |
|
Press CURSOR | or to highlight a function. Press the SELECT button to select the function setting. When the function has a “✓” in |
the box it is ON. |
|
Audio Source
The mode you select will be displayed at the left edge of the TV. The source received will be displayed above the mode. See example below for each selection when both stereo and second audio are received (monaural is always received).
STEREO SELECTED
Audio |
|
| |
Stereo | Ant A 31 | ||
Selected | |||
ST/SA | NEWS | ||
| |||
|
| 10:00 PM |
Audio
Broadcast
Internal Speakers
On - Select this feature if using the internal speakers only.
SAP SELECTED
SAP | Ant A 31 |
ST/SA | NEWS |
| 10:00 PM |
MONO SELECTED
Mono | Ant A 31 |
ST/SA | NEWS |
| 10:00 PM |
Off - Select this feature if you prefer to use only speakers from a separate stereo system.
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio for that channel.
Perfect Volume
This function will automatically adjust volume so each channel has the same average volume level.
Loudness
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.
41