SETUP
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card.
Setup
CableCARD Info Set AV Control
Upgrades
Quick Start Up
Move SEL Select
Setup |
|
Upgrades |
|
Software Version #: Main | VXX.XX |
MMC Software Upgrade |
|
Upgrade Now |
|
Please insert MMC card |
|
before upgrading. |
|
Move SEL Return |
|
Insert MMC card, then press the CURSOR PAD G, H to highlight “Upgrade Now”. Press the SELECT button to select and start upgrading.
NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure.
Quick Start Up
This feature will select Quick Start Up options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the Quick Start Up feature will activate the TV tuners circuits when the TV is in “standby mode” which is commonly referred to as “off”. This will allow you to quickly tune to channels when first turning the TV on. Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected.
Setup
CableCARD Info
Set AV Control
Upgrades
Quick Start Up
Move SEL Select
Setup
Quick Start Up
Select ON to have the TV tune channels quickly at 1st turn on.
Select OFF to save electricity.
Off 
On
Move SEL Return
ON-SCREEN DISPLAY
77