Hitachi 50V500G Connecting External Video Devices, Before Operating External Video Source

Page 15

CONNECTING EXTERNAL VIDEO DEVICES

The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.

The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your partic- ular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.

Before Operating External Video Source

The input mode is changed every time the VID1~VID5 button is pressed as shown below. Connect an external source to the INPUT terminal, then press the VID1~VID5 button as necessary to view the input source (see page 33).

FIRST TIME USE

NOTE: 1. When the TV is set to VIDEO and a video signal is not received from the VIDEO INPUT JACK on the back panel of the TV (i.e., VCR/laserdisc player, etc. is not connected or the video device is OFF), the set will appear to be OFF.

2. You may select other Input sources by AV Net (see page 20).

CONNECTING A MONAURAL AUDIO SOURCE TO INPUT2~INPUT5

1.Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack.

3.Press the VID2~VID5 button to view the program from the VCR or the laserdisc player. The VIDEO OSD label disappears automatically after approximately four seconds.

4.Press the ANT button to return to the previous channel.

ANT A

 

 

 

 

 

 

 

 

 

DVI-HDTV

 

 

 

PR

PB

Y

 

TO

INPUT 1

 

 

 

 

 

R

(MONO)/L

 

 

CONVERTER

 

 

 

 

 

 

 

AUDIO

 

 

 

PR

PB

Y/VIDEO

 

ANT B

INPUT 2

 

 

 

 

 

R

(MONO)/L

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

R

(MONO)/L

VIDEO

S-VIDEO

AUDIO

INPUT 3

 

 

 

 

TO HI-FI

 

 

 

 

 

CENTER

 

R

(MONO)/L

VIDEO

S-VIDEO

IN

INPUT 4

 

 

 

 

 

 

 

 

 

IR

 

 

 

 

 

BLASTER

 

 

 

 

 

L

 

R

L

 

S-VIDEO

MONITOR

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

R

 

 

AUDIO

 

 

 

 

 

 

 

Audio Video

OUTPUT

VCR

15

Downloaded from www.Manualslib.com manuals search engine

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Important Safety Instructions First Time USE Remote Control ON-SCREEN DisplayUseful Information Index Refer Servicing to Qualified Service Personnel Important Safety InstructionsPublic Viewing of Copyrighted Material Read before operating equipmentFirst Time USE AccessoriesHOW to SET UP Your NEW Hitachi LCD Rear PTV Antenna Connections to Rear Jack Panel HOOK-UP Cables and ConnectorsFront Panel Controls Front Input Jacks InputPhoto MC Photo MC LED Light Indicator Power buttonPower light Temp indicatorFront Panel Jacks and Connectors Monitor OUT Rear Panel JacksComponent Y-PBPRInputs IR BlasterDVI-HDTV Input Input Rear Panel Connections Typical FULL-FEATURE SetupTips on Rear Panel Connections Rear Panel of Television Connecting External Audio DevicesConnecting External Video Devices Connecting a Monaural Audio Source to INPUT2~INPUT5Before Operating External Video Source Video ANT B Connecting a Stereo Source to INPUT2~INPUT5Connecting AN S-VIDEO Source to Input 3, 4 Digital Output Capability DVD Player Connecting a Component Source to Input 1 or 2 Y-PBPRMouse Connecting AV NetworkHitachi AV NET SET UP AV Network Setup WizardSatellite Brand Set-Top-Box . . . . . . . . . . Code AUDIO/VIDEO Network AV NET CodesLight Button Remote ControlHOW to USE the Remote to Control Your LCD Rear PTV Cable CBLSET-TOP-BOX STB Sleep and Dash button PVR Personal Video Recorder buttonCD and AMP buttons Channel selector buttonsControl NET buttonJump LED Light and OSD IndicatorPhoto MC Memory Card Detail Information OSD and LEDRotate SlideshowRemote Control AV NET Learning Wizard RemoteExpanded Aspect buttonExit button VOLUME, Mute buttonVideo button Menu button24 VID1 ~ VID5 Last Channel Last CH buttonPICTURE-IN-PICTURE buttons Surf buttonPOP Mode PICTURE-IN-PICTURE PICTURE-IN-PICTURE PIPPIP button Split Mode PICTURE-IN-PICTURE PIP Mode buttonSwap button with PIP on POP SUB Freeze with PIP OFF Freeze button With PIP onFreeze button with PIP OFF POP Main Freeze with PIP OFFExclusive TV Buttons Using the Remote to Control VCR FunctionsOperating the precoded function for your VCR Precoded VCR ButtonsPrecoded Cable BOX buttons Using the Remote to Control Cable BOX FunctionsOperating the precoded function for your cable box Cable CBL buttonPrecoded SET-TOP-BOX/SATELLITE Receiver but- tons SET-TOP-BOX STB buttonUsing the Remote to Control DVD Functions Operating the precoded function for your DVD playerPrecoded DVD Buttons Using the Remote to Control PVR Functions PVR ButtonPrecoded PVR Buttons Using Your Remote To Control Additional Audio Equipment Operating the precoded function for your Audio componentPrecoded Audio Buttons VCR Brand . . . . . . . . . . . . . . . . . Code Audio Codes for Remote ControlON-SCREEN Display OSD Video Audio Aspect Chan Manager Locks Video Picture ModeVideo ContrastReset Video Settings Color ManagementPure depending on the user’s preference Noise Reduction Auto Movie Mode Color DecodingAuto Color Sound Enhancement Audio Source Auto Noise Cancel Perfect Volume LoudnessAudio Treble Bass BalanceTechnology Sound EnhancementVertical Position Aspect ModeAspect Mode Auto AspectChannel Manager Chan. ManagerReception Band Cable1 Auto Channel ScanScan Channel ListChannel ID Locks LocksMovie Ratings TV Ratings Canadian Ratings Eng Canadian Ratings English ChartFrn Canadian RatingsSetup Menu PreferenceDisplay Screen Wipe Set Menu BackgroundScreen Saver OptionSet The Clock Set The ClockSet The Inputs Set The InputsSet Black Side Panel Set The Color SystemPlease Set Clock First Set Event TimerChannel Closed CaptionLamp Replacement Lamp ReplacementLamp Replacement Screw 120V Do not Care of Your Hitachi Television Your Remote ControlIgnition Noise Reception ProblemsUseful Info 50V500E 60V500E Dimensions 50V500 50V500A 50V500GInputs OutputsHome Electronics Division Dial Toll FreeDigital Media Division Index IndexPicture-in-Picture PIP, 34 Page Page Page QR57028
Related manuals
Manual 84 pages 60.56 Kb Manual 84 pages 58.61 Kb

50V500E, 50V500A, 50V500G, 60V500A, 60V500E specifications

The Hitachi 60V500E, 60V500A, 50V500G, 50V500A, and 50V500E projectors are part of the renowned Hitachi series known for their advanced technology and high performance in various settings. Designed to cater to diverse needs, these models have proven to be highly versatile, making them ideal for educational institutions, corporate environments, and large-scale events.

One of the standout features of these projectors is their high brightness levels, with the 60V500E and 60V500A offering an impressive 6,000 lumens. This high lumen output ensures that presentations remain vivid and clear even in well-lit rooms. The 50V500G, 50V500A, and 50V500E, while slightly lower in brightness at 5,000 lumens, still deliver exceptional image clarity suitable for most environments.

The projectors utilize advanced DLP and LCD technologies to produce sharp, vibrant images with accurate color reproduction. Hitachi incorporates innovative lens shift technology, allowing users to easily adjust the projection angle without sacrificing image quality. Additionally, the models support multiple resolution options, including Full HD, giving users flexibility depending on their specific needs.

Connectivity is another area where the Hitachi projectors excel. They come equipped with various ports such as HDMI, USB, and VGA, ensuring seamless connectivity with a wide range of devices. This is complemented by wireless capabilities, which allow for easy sharing of content without the hassle of cables.

The integrated speakers provide balanced audio quality, making these projectors suitable for multimedia presentations. Moreover, they feature an eco-friendly mode that helps reduce power consumption, extending the lifespan of the lamp while maintaining optimal performance.

User convenience is prioritized in these models, with an intuitive interface and remote control functionality. The projectors also include various preset modes tailored for different presentation scenarios, enhancing user experience.

In summary, the Hitachi 60V500E, 60V500A, 50V500G, 50V500A, and 50V500E projectors stand out for their exceptional brightness, advanced imaging technologies, extensive connectivity options, and user-friendly design. With their robust features and reliable performance, they are well-suited for a variety of applications, making them a valuable asset for any professional or educational setting.
Top Page Image Contents