Hitachi 50V500E, 50V500G HOOK-UP Cables and Connectors, Antenna Connections to Rear Jack Panel

Page 6

HOOK-UP CABLES AND CONNECTORS

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.

FIRST TIME USE

300-Ohm Twin Lead Connector

This outdoor antenna cable must be connected to an antenna adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which connect to inputs and outputs located on the television’s rear jack panel and front control panel.

IR Mouse Cable (Provided)

Connect the IR Mouse Cable to the IR BLASTER output of your TV when using the A/V Network feature. You must place the IR mouse transmitter in front of the IR sensor of your external components. This connection allows your TV to control your external components without using your external component’s remote control.

“F” Type 75-Ohm Coaxial Antenna Connector

For connecting RF signals (antenna or cable TV) to the antenna jack on the television.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc players with an S-Video feature in place of the standard video cable to produce a high quality picture.

Digital Visual Interface (DVI) Connection Cable

This cable is used to connect external devices with DVI-HDTV output capability.

ANTENNA CONNECTIONS TO REAR JACK PANEL

VHF (75-Ohm) antenna/CATV (Cable TV)

When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or cable TV system, connect the coaxial cable to the ANT B terminal.

VHF (300-Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into the antenna terminal on the TV.

To outdoor antenna or CATV cable

To second antenna or cable system

To outdoor VHF or UHF antenna

When both VHF and UHF antennas are connected

Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your dealer or service store for the antenna mixer.

ANT A/ANT B

From outdoor

From UHF antenna

antenna or

CATV System

Antenna Mixer

6

Downloaded from www.Manualslib.com manuals search engine

Image 6
Contents Important Safety Instructions First Time USE Remote Control ON-SCREEN DisplayUseful Information Index Important Safety Instructions Refer Servicing to Qualified Service PersonnelRead before operating equipment Public Viewing of Copyrighted MaterialAccessories First Time USEHOW to SET UP Your NEW Hitachi LCD Rear PTV HOOK-UP Cables and Connectors Antenna Connections to Rear Jack PanelFront Panel Controls Front Input Jacks InputPhoto MC Temp indicator Power buttonPower light Photo MC LED Light IndicatorFront Panel Jacks and Connectors Rear Panel Jacks Monitor OUTComponent Y-PBPRInputs IR BlasterDVI-HDTV Input Input Typical FULL-FEATURE Setup Rear Panel ConnectionsTips on Rear Panel Connections Connecting External Audio Devices Rear Panel of TelevisionConnecting External Video Devices Connecting a Monaural Audio Source to INPUT2~INPUT5Before Operating External Video Source Connecting a Stereo Source to INPUT2~INPUT5 Video ANT BConnecting AN S-VIDEO Source to Input 3, 4 Digital Output Capability Connecting a Component Source to Input 1 or 2 Y-PBPR DVD PlayerConnecting AV Network MouseAV Network Setup Wizard Hitachi AV NET SET UPAUDIO/VIDEO Network AV NET Codes Satellite Brand Set-Top-Box . . . . . . . . . . CodeRemote Control Light ButtonHOW to USE the Remote to Control Your LCD Rear PTV Cable CBLSET-TOP-BOX STB Channel selector buttons PVR Personal Video Recorder buttonCD and AMP buttons Sleep and Dash buttonNET button ControlMemory Card Detail Information OSD and LED LED Light and OSD IndicatorPhoto MC JumpSlideshow RotateRemote Control Remote AV NET Learning WizardAspect button ExpandedMenu button VOLUME, Mute buttonVideo button Exit buttonSurf button Last Channel Last CH buttonPICTURE-IN-PICTURE buttons 24 VID1 ~ VID5POP Mode PICTURE-IN-PICTURE PICTURE-IN-PICTURE PIPPIP button Split Mode PICTURE-IN-PICTURE PIP Mode buttonSwap button with PIP on POP Main Freeze with PIP OFF Freeze button With PIP onFreeze button with PIP OFF POP SUB Freeze with PIP OFFPrecoded VCR Buttons Using the Remote to Control VCR FunctionsOperating the precoded function for your VCR Exclusive TV ButtonsCable CBL button Using the Remote to Control Cable BOX FunctionsOperating the precoded function for your cable box Precoded Cable BOX buttonsSET-TOP-BOX STB button Precoded SET-TOP-BOX/SATELLITE Receiver but- tonsUsing the Remote to Control DVD Functions Operating the precoded function for your DVD playerPrecoded DVD Buttons Using the Remote to Control PVR Functions PVR ButtonPrecoded PVR Buttons Using Your Remote To Control Additional Audio Equipment Operating the precoded function for your Audio componentPrecoded Audio Buttons Audio Codes for Remote Control VCR Brand . . . . . . . . . . . . . . . . . CodeON-SCREEN Display OSD Video Audio Aspect Chan Manager Locks Picture Mode VideoContrast VideoReset Video Settings Color ManagementPure depending on the user’s preference Noise Reduction Auto Movie Mode Color DecodingAuto Color Treble Bass Balance Auto Noise Cancel Perfect Volume LoudnessAudio Sound Enhancement Audio SourceSound Enhancement TechnologyAuto Aspect Aspect ModeAspect Mode Vertical PositionChannel Manager Chan. ManagerReception Band Auto Channel Scan Cable1Channel List ScanChannel ID Locks LocksMovie Ratings TV Ratings Canadian Ratings English Chart Canadian Ratings EngCanadian Ratings FrnSetup Menu PreferenceDisplay Option Set Menu BackgroundScreen Saver Screen WipeSet The Clock Set The ClockSet The Inputs Set The InputsSet The Color System Set Black Side PanelSet Event Timer Please Set Clock FirstClosed Caption ChannelLamp Replacement Lamp ReplacementLamp Replacement Screw 120V Care of Your Hitachi Television Your Remote Control Do notReception Problems Ignition NoiseUseful Info Outputs Dimensions 50V500 50V500A 50V500GInputs 50V500E 60V500EDial Toll Free Home Electronics DivisionDigital Media Division Index IndexPicture-in-Picture PIP, 34 Page Page Page QR57028
Related manuals
Manual 84 pages 60.56 Kb Manual 84 pages 58.61 Kb

50V500E, 50V500A, 50V500G, 60V500A, 60V500E specifications

The Hitachi 60V500E, 60V500A, 50V500G, 50V500A, and 50V500E projectors are part of the renowned Hitachi series known for their advanced technology and high performance in various settings. Designed to cater to diverse needs, these models have proven to be highly versatile, making them ideal for educational institutions, corporate environments, and large-scale events.

One of the standout features of these projectors is their high brightness levels, with the 60V500E and 60V500A offering an impressive 6,000 lumens. This high lumen output ensures that presentations remain vivid and clear even in well-lit rooms. The 50V500G, 50V500A, and 50V500E, while slightly lower in brightness at 5,000 lumens, still deliver exceptional image clarity suitable for most environments.

The projectors utilize advanced DLP and LCD technologies to produce sharp, vibrant images with accurate color reproduction. Hitachi incorporates innovative lens shift technology, allowing users to easily adjust the projection angle without sacrificing image quality. Additionally, the models support multiple resolution options, including Full HD, giving users flexibility depending on their specific needs.

Connectivity is another area where the Hitachi projectors excel. They come equipped with various ports such as HDMI, USB, and VGA, ensuring seamless connectivity with a wide range of devices. This is complemented by wireless capabilities, which allow for easy sharing of content without the hassle of cables.

The integrated speakers provide balanced audio quality, making these projectors suitable for multimedia presentations. Moreover, they feature an eco-friendly mode that helps reduce power consumption, extending the lifespan of the lamp while maintaining optimal performance.

User convenience is prioritized in these models, with an intuitive interface and remote control functionality. The projectors also include various preset modes tailored for different presentation scenarios, enhancing user experience.

In summary, the Hitachi 60V500E, 60V500A, 50V500G, 50V500A, and 50V500E projectors stand out for their exceptional brightness, advanced imaging technologies, extensive connectivity options, and user-friendly design. With their robust features and reliable performance, they are well-suited for a variety of applications, making them a valuable asset for any professional or educational setting.