SETUP
Set AV Control
This feature will select the AV Control feature. Set this feature if you want to control some of the TV functions from an external home control system.
Setup
CableCARD Info
Set AV Control
Upgrades
Quick Start Up
Move SEL Select
Setup
Set AV Control
If you want to use the AV Control function, please set the RS232C.
Connected RS232C
Move SEL Return
Use the CURSOR PADS and the SELECT button to check the Connected RS232C box.
NOTE: For use with third party home Audio/Video control systems which are commercially available. Please see your dealer regarding these “non Hitachi” home control systems.
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card.
Setup
CableCARD Info Set AV Control
Upgrades
Quick Start Up
Move SEL Select
Setup |
|
Upgrades |
|
Software Version #: Main | VXX.XX |
MMC Software Upgrade |
|
Upgrade Now |
|
Please insert MMC card |
|
before upgrading. |
|
Move SEL Select |
|
Insert MMC card, then press the CURSOR PAD , to highlight “Upgrade Now”. Press the SELECT button to select and start upgrading.
NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure.
Quick Start Up This feature will select Quick Start Up options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the Quick Start Up feature will activate the TV tuners circuits when the TV is in “standby mode” which is commonly referred to as “off”. This will allow you to quickly tune to channels when first turning the TV on. Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected.
Setup | Setup |
|
CableCARD Info | Quick Start Up | |
Set AV Control |
|
|
Upgrades | Select ON to have the TV tune | |
|
| |
Quick Start Up | channels quickly at 1st turn on. | |
|
| |
Move SEL Select |
|
|
| Select OFF to save electricity. | |
| Off | On |
| Move | SEL Select |
ON-SCREEN DISPLAY
71