FRONT PANEL CONTROLS
FRONT VIEW
Models: 61UDX10B, 53UDX10B
CH+
POWER INPUT MENU
VOL-VOL+
EXIT SELECT
CH-
Models: 43FDX11B, 43FDX10B
PUSH | CH+ |
POWER INPUT MENU
VOL-VOL+
/ | EXIT SELECT |
CH-
Push open door and pull forward and down
PUSH
/
Push open door and pull forward and down
CH+
POWER INPUT MENU
VOL-VOL+
EXIT SELECT
CH-
MAGIC FOCUS
CH+
POWER INPUT MENU
VOL-VOL+
EXIT SELECT
CH-
DIGITAL
ARRAY
MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
INPUT/EXIT button
Press this button to select the current antenna source, VIDEO: 1, 2, 3, 4, 5 or alternate antenna source. Your selection is shown in the top right corner of the screen. This button also serves as the EXIT button when in MENU mode.
NOTES: Your remote control does not have an INPUT button. To change to video inputs, press VID1~VID5 buttons depending on your choice (see page 23).
CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down ( ) and up ( ) buttons when in MENU mode.
VOLUME level
Press these buttons for your desired sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left ( ) and right ( ) buttons when in MENU mode.
POWER button
Press this button to turn the TV on or off.
NOTES: 1. Your HITACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1, 2, 3, 4 or 5 is selected. Check the Power Light to make sure the TV is turned off when not in use.
2.To see an
8